Print Page - Fly Sky Receiver - FS R8B Channel Connection

Title: Fly Sky Receiver - FS R8B Channel Connection
Post by: sudhakar_yg on August 15, 2013, 11:45:47 AM

Hi All,
I have a query regarding FS-R8B receiver connection to FC board.
I am not able to find the exact channel pins mapping to AIL, ELE, THR, & RUD for this receiver.

I could find the channel to function mapping for FS-R6B receiver as following.
CH1 = ailerons
CH2= elevator
CH3 = esc or throttle
CH4 = rudder

Will the above mapping holds good even for FS-R8B receiver also?

Thanks,
Sudhakar

Title: Re: Fly Sky Receiver - FS R8B Channel Connection
Post by: sudhakar_yg on August 16, 2013, 12:47:25 PM

Hello All,
Request your help for this query...
I am planning to work on my quad configuration this week end..
So the answer to this query is very important & urgent..

Thank you all once again....

Sudhakar

Title: Re: Fly Sky Receiver - FS R8B Channel Connection
Post by: v2 eagle on August 16, 2013, 07:40:33 PM

in mode 2, this is commom for all Flysky rx. just chek which mode are you in with the system settings menu.

Title: Re: Fly Sky Receiver - FS R8B Channel Connection
Post by: sudhakar_yg on August 16, 2013, 09:47:08 PM

Thanks V2. I was in mode-1. Changed to mode-2, will check now.

Thanks for the info.

RC India

RC Equipments => Radios and Receivers => Topic started by: sudhakar_yg on August 15, 2013, 11:45:47 AM