It is very helpful for others (especially beginners) to see what equipment is commonly used by experienced RCers.  To make this information easily accessible to others, please post the contents of your hangar, including details of the main components used.

You can either post it in your signature OR as a part/reply to your introduction entry in the "RC People" board.

You can update your signature by clicking on "Profile" from the top, and then choosing "Forum Profile Information" from the menu on the left. The details of your hangar can then be posted in the "Signature" text box.

My Hanger:

1. Hobbico AEROCRUISER EP ARF:Hitec 4ch SC FM Rx,2-HS-55 Servos,Stock Motor 380 size,Stock ESC and 8.4V 1100 mAh Ni-mH battery.

2. Hobbico VENTURA EP Sailplane: Hitech 4CH SC FM Rx, 2-HS-55 Servos,Stock 380 motor,6X4 folding Prop, stock ESC 8.4V,1100mAh Ni-mH Battery.

3.Ultrafly Cessna with Beginner wing, Hitec 5Ch SC FM Rx, 4 HS-55 Servos,400 sized motor with gear box. Electrifly C-30 ESC, 9.6V , 1400 mAh Ni-mH, 10 x 4.7 Slo Fly Prop.

4.Scratch built Foam model with Ultrafly cessna Advanced wing, Hitec 5CH micro FM full range SC Rx, 2 HS-55 servos,2 HS-81 Servos, 400 size motor with gear box ,30 amp ESC, 8 x 8 APC Electric prop, 12volt 1400 mAh Ni-mH battery.

5. GP Electricub Kit built, 4 Ch SC full range FM Rx, 3 HS-81 Servos, 30 Amp ESC, 600 sized motor with 2.5:1 gear box, 10 x 8 MAS Electric Prop, 8.4 Volt 1800 mAh SANYO Ni-cd battery

6. GP SPECTRA EP 2M Sailplane Kit built, Hitec 4 ch SC Mini Rx, 2 HS-422 Servos, 8x4 Folding Prop, S-600 motor, 8.4 Volt 2000mAh Ni-mH battery, 30 amp ESC.

7. GP RYAN STA EP Kit built, Hitec 8Ch DC Rx, 2 HS-81 Servos, 2 Hobbico CS-35 Servos, Electrifly RIMFIRE 35-30-1450 brushless motor,SS-45 Brushless ESC,9.6 Volt 2000mAh/ 3600 mAh battery, 11 x 7 APC Electric Prop.

8. GP ELECTROSTREAK EP ARF, Hitec 5 Ch micro Rx, 3 HS-81 Servos, Magnetic Mayhem motor,
Kontronic Rondo 600 ESC, 2200 mAh 11.1 volt 3S Li-po. 8 x 5 Folding Prop.

9. Balsacraft EASYSTREET Kit built not yet flown.

10.GP Super Sportstor EP ARF Still in the box unopened.

Radio Txs are 1.Hitec Neon 3Ch SS FM 72 MHz.
                   2.Hitec PRISM 7X FM 7-Ch Tx with SPECTRA RF MODULE, 72MHz.

Just thought of posting pics of whatever planes I have now.  I would also like to see the collections of other members.  Please post whatever pics you can find of your own models.

some more..

some more..

Guys,
I took a couple of pictures of my hangar. Not in the best shape, but this is how i store my planes...
-Gaurav

hey guys will try to post some pics later

so here goes

E-starter from gws
MR. Moss glider
F22 with custom ducting (build in progress)
V22 osprey VTOL (50% done waiting for custom made mounts)
extra 300 built but never flown yet

Hi All,

Here is a pic of my Heli's

Honey Bee Cp 2
Honey Bee king 2
Belt Cp V2

Also Have a
Xtwin Bi-wing
Ornithopter Dragonfly

Thanks
Hellyflyer

for a long time i have been thinking to start this thread and now i have!
hurray!
the main purpose of this thread is to provoke the fellow members to post as many pics as possible of thier machines so that people like me can observe at them and try to make one like that for ourselves .
so starting with this will also be helpful for the begginers and the hungry  for pics people like me!
to share the info and enjoy the beauty!
so keep posting!

My Trex 500E.

My Heli Hangar (all TT Raptor) want to add some Align FBL soon.... & Servo set-up Pic for trainer....

Quote from: ANTA on October 03, 2010, 05:29:59 PM
My Trex 500E.

where is your flybar man....

Nice collection of helis MR. harveer

Thanx traxxrc1...Some vids....

http://www.youtube.com/watch?v=4ThZFQ4TyJA
http://www.youtube.com/watch?v=XDMK1jpcXyY

I have a Walkera 5G4, waiting for my Sky Husser - ordered from Rediff.  Hope the guy delivers.  Will post snaps soon...

Here is my hangar...
http://www.rcindia.org/rc-people/vikas-from-bangaloredelhi/msg35560/#msg35560

I have

-> Walkera 5G4 - 4 Channel - 2402 Tx
-> Double Horse Volitation 9053 - Native Tx
-> Double Horse Sky Husser - 2 Channel Plane - Native Tx
-> Walkera CB 100 - 4 Channel without Tx on its way from Hong Kong.

Will post snaps later.

hi guys, i m new to rcindia.. & would like to share  my previous work with all.

here are some pics of my first ever electric planes: 3d & F-16.

Attention to details... nice

And welcome to RC India !

Thanks for reviving this thread too !

thanx anwar.... i like my planes to look good too..

a vid of my scratchbuilt "busy bee".http://www.youtube.com/watch?v=ayNpSaveUCg

Hi Amar,

Welcome to RcIndia.. It's about time you showed up mate..

Cheers

Atul G.

ha ha.. thanx atul.. whats uppp buddy??

hows the cub doing?

Hey Amar,

Everything is great..Cub is doing just fine..

Get in touch with prady, this 18th or I guess the date will be decided this weekend.

Its going to be a night flying event at pancard. I guess about 10 glow sticks should be in the air..

So anyone who wants to join please be there.

Cheers..

my old collection year 2001

Whats the little one you are holding?

looking at the wing design looks like P51.. ? or spitfire

That's probably not a Mustang (definitely not a Spitfire - only the photo recce versions had clipped wings, all others had the familiar elliptical wings). It could be an aerobatic aircraft.

My Hangar:

1. Trex 500 3g
2. Belt CP V2-good old days when it was right out of the box. Trust me you wouldn't wanna see it now  
3. Walkera CB180q
4. Futaba 7C radio. Ignoring my walkera and esky radios
5. 2Syma AH 64 3ch coax helis, which my nephews are working on right now. Hence no pictures  

For those who are very particular...

Had a very bad crash nose into the ground with my belt cp v2. Lost the head unit, blades, one push rod link flew some place else on impact, stripped main gear, bent flybar, broken canopy(on super glue now).
Had all spare parts except for the push rods.

Awaiting arrival from HK..

As I started picking up on the learning curve, replaced stock esky gyro with telebee(keeping a spare quark as a proud possession  ), stock 25A esc with 40A exceed esc, blades with align 325D CF, battery to 2200, 25C blue lipo (bit heavy) and keeping stock on metal head and tail assembly(el cheapo chinese ones) upgrades for future.

hi all ,, 'm just a beginner.. this is my 3CH heli... here's my vid.. have a look. i broke the rotar blades while landing... need a pair of spare blades from india. any link would be of great help. thank you.

http://www.youtube.com/watch?v=xtQugXAQ0MQ

In reply to post # 26 by VC.
Not all PR version of spitfire were clipped wing neither all clipped wing version of spitfire were PR version.
The clipped wing started from Mark V onwards and continued till end of production, based on intended role of the production aircraft. The wings were clipped to improve roll rate and low level performance of the air craft.

@# 24
In reply to question, what is the small yellow one, to me it looks like a practice plane model of either an Extra or CAP      

Well my first scratch built la stick.

Hi,

This is my RC hangar/workshop...It used to be a kitchen.

Now, it has been converted in my heli workshop and pyrotechnic workshop.

Yak 54 EPP is the only plane in my hangar.

Comments and suggestions are welcome. I find it very very difficult to clean once it gets messed up. Infact, these pics are after i have tried to clean it up.

Nice .....Neat and Clean

Thanks hellyflyer,

Those wall mounts were lying around for a month or so..Finally, good amount of space once the nitros are on the shelf.

Nice. What's with all the fireworks?

Crackers in RC workshop!!! 

Quote from: sumitnathwani on January 23, 2013, 10:20:39 AM
Crackers in RC workshop!!! 

Naah I dont keep crackers in there...I just keep the electric firing equipment and the talon igniters there. N before a show, whatever plan is to be made is made in there. Like fuising the talons in parallel or series etc..

Quote from: sanjayrai55 on January 23, 2013, 10:11:50 AM
Nice. What's with all the fireworks?

I love fireworks ( I have done few amateur and commercial shows for parties using e-firing methods. Infact, whenever i go to field i always fire few rockets and aerial shells...You see the smell of nitro and gunpowder is intoxicating.

I also collect firework labels, poster etc. The firework history and the art of making fireworks (Chemistry) amazes me. I dont make fireworks but i know the basics quite well.

Ohh!! i thought you keep it for initial stage before starting flying... I mean start flying with BANG of 7 Shots!!! 10 Shots... !! 

@sumit: Had Tareq Al saadi been flying on our field, i would have definitely honored him with 21 shots of dark salutes.

He is Best!! I cannot say anything... 101 shots are less for him ...

Here's mine , small but i love it
In my hanger (it used to be my Dining Table  )
1 - HK 450 Pro x2
2 - Dynam E-Razor 450
3 - Hiller 450 Sport(v3)
4 - Voilation 9053 (co-axial heli)
5 - HY BRUSHLESS Racing Boat
6 - HY model 1/18 Buggy
7 - Firebird 403 Plane
8 - few micro helis
with FlySky TH9x and few stock ones

@Dhruvafreak: Nicely arranged helis and spotless...

So, you converted ur dining table n i have converted my kitchen to a workshop/hangar.

nice workshop..doctor sahab....

l

@Doctor sir : hahaha i like your kitchen , I m planning to attack my kitchen too 
Things should change with technology

My hangar and workshop.
The workshop is usually as clean as the hangar. I've got some projects running right now explaining the mayhem...

The fieldbox and the transmitter tray are both handmade.

Too clean. Unhealthy...you need "treatment"

hehe, I stay fit by inhaling solder vapors and Chlorine fumes most of the day so somethings got to balance out

You need me Girish, for the treatment. One visit and you won't recognize the place  And you won't find any of your maal!

my hanger... all closed in one store room....

everything is either scratch built or plan built or kit built... no ARFs.... and wanna be that way...!

Aerovishwa: I like   Very much in keeping with Ferrari

@sanjayrai, sire you and every member of rci is most welcome to come over. All I need now is a small bar some corner >D
@aerovishwa, sir hatsoff

@aerovishwa: Good job...Good utilization of all available space.

Quote from: girishsarwal on January 27, 2013, 12:39:38 PM
My hangar and workshop.
The workshop is usually as clean as the hangar. I've got some projects running right now explaining the mayhem...

The fieldbox and the transmitter tray are both handmade.

Hey girish,

I thinka 50cc gasser finds a way in, n it will look full of stuff hehehe..Nice spacious workshop dere

Thanks @doctor, I've kinda challenged myself that once I overcome my occasionally botched landings, it'll be time for all kind of flying machines to come in.

thanks.. girish, DOC and sanjay sir.....

cant accept my name with a sir... i am still 20 ( or to be 20 in a month or so )

@sanjay sir.. next time i am in mumbai.. will sure drop by...!!

any every one is welcomed to belgaum.. if any one plans a weekend off..

My hangar......

one big working table & some models...

laxman

Laxman

i thought you are more of a heli guy, you look like Aeroplane guy more? nice neat hangar you have out there

thanks dear... actually i have started flying from aero plane...but currently i am flying both but prefer heli first....

laxman

Laxman used to be a plane flier, till he came in contact wid me..hehehe...

Now, we both have one addiction...HELIs...

Quote from: laxmansuthar on March 04, 2013, 07:03:30 PM
My hangar......

One thing is missing....................A gasser plane like Goldwing 540 and a big big electric like X7 or Logo 700 or a Trex 800 DFC trekker

Lol...doctor sahab....AAp ke muh main ghee shakaar...
i wish for All Models...

laxman

Here is Mine..

-Tanmay..

One More..

very nice...hangar umayash.

Incredibly neat and clean....

Mine is full of crashed models 

Thank you @ Sanjay Rai, Laxman Suthar..

Tanmay, yours is the most clean and 'disinfected' workshop I've ever seen
I'm sweating at the thought of what all I will have to do to my workshop just to bring it close to being that clean!

Thanks- Girish Sarwal..

...and we are a happy family now 

Like to have one like that...

The whole setup cost me about Rs. 1200. I think everyone should go for it as it's far better that tucking your planes under the cot or everywhere around the house. The house keeper for sure will be one happy lady 

finally your planes can take rest aramse 

And our home minister too 

So where are the wings

  PERFECT HANGER....

Quote from: sanjayrai55 on September 04, 2013, 07:58:12 PM
So where are the wings

Just couple of brackets short Sanjay sir! Will get them today and the wings get their place too

Thank you madaquif

Some More Aircraft's Added to mine..

some of my best planes and delta wings

Really Great Planes

My very first rc project-
Quadcopter using alien 550 frame. Maybe a wrong choice to start with the hobby so had to buy mini beetle from rcbazzar and learn to fly, even after building the bigger one  .

Now I can fly it on my terrace but should really find a safe place to fly.

-RCNoob