RC India

After crashing three RTF (Two COX "Sky Cruiser" and One "Super Cub")  I decided to build my own to learn to fly.
Heck, crashed again, real hard this time, and My ESC is BEC now :( no power to motor, Motor shaft bent, broke prop
and 6ch Rx antenna almost fell off!

So I decided to build a pusher, as I will only trash the foam, not my electronics!  8-)

so here are the specs:

> A2212 1400Kv outrunner
> XXD HW30A ESC
> 9 x 6 Prop
> 3S 5000mAh battery
> 6ch DSM2 Rx
> Emax ES08DE 9g Servos

Building material:
> $1 20x30 3/16" Dollar Tree foam board
> 1/8" hobby ply (lasercut)
> Laser Cut control horns. (FT design copied  :P)
> Crashed "Super Cub" tires
> 1/16" steel wires (z band and tire)

Tools
> hot glue gun
> Razor blade
> Needle-nose pliers
> Straight edge, Ruler,

Here she is ready for its Maiden flight (hopefully I will not crash this time... :giggle:)

(http://i1144.photobucket.com/albums/o483/chilschils41/20140529_022655_zpsb2888a85.jpg) (http://s1144.photobucket.com/user/chilschils41/media/20140529_022655_zpsb2888a85.jpg.html)

(http://i1144.photobucket.com/albums/o483/chilschils41/20140529_022522_zpsca57364d.jpg) (http://s1144.photobucket.com/user/chilschils41/media/20140529_022522_zpsca57364d.jpg.html)

(http://i1144.photobucket.com/albums/o483/chilschils41/IMG-20140611-WA0021_zpsc5572ee0.jpg) (http://s1144.photobucket.com/user/chilschils41/media/IMG-20140611-WA0021_zpsc5572ee0.jpg.html)

(http://i1144.photobucket.com/albums/o483/chilschils41/IMG-20140611-WA0023_zpsf7909cbc.jpg) (http://s1144.photobucket.com/user/chilschils41/media/IMG-20140611-WA0023_zpsf7909cbc.jpg.html)

(http://i1144.photobucket.com/albums/o483/chilschils41/IMG-20140611-WA0025_zps8011f51f.jpg) (http://s1144.photobucket.com/user/chilschils41/media/IMG-20140611-WA0025_zps8011f51f.jpg.html)

(http://i1144.photobucket.com/albums/o483/chilschils41/IMG-20140612-WA0002_zps4e8a89e5.jpg) (http://s1144.photobucket.com/user/chilschils41/media/IMG-20140612-WA0002_zps4e8a89e5.jpg.html)

Oh wait! forgot to stick some magnets to front canopy cover!

Same specs as the pusher except, its had A2212 2200KV Motor with 8 x 4 Prop

(http://i1144.photobucket.com/albums/o483/chilschils41/20140512_232421_zpsb6d2e5a3.jpg) (http://s1144.photobucket.com/user/chilschils41/media/20140512_232421_zpsb6d2e5a3.jpg.html)

(http://i1144.photobucket.com/albums/o483/chilschils41/20140518_232223_zps5e089ffb.jpg) (http://s1144.photobucket.com/user/chilschils41/media/20140518_232223_zps5e089ffb.jpg.html)

(http://i1144.photobucket.com/albums/o483/chilschils41/20140518_232314_zps729dd14d.jpg) (http://s1144.photobucket.com/user/chilschils41/media/20140518_232314_zps729dd14d.jpg.html)

 :banghead: :banghead: :banghead:

NEED MORE PRACTICE  :headscratch:

Hi.

You can have a look into my build which was pusher trainer.

http://www.rcindia.org/electric-planes/convertible-scratch-build-for-5th-anniversary-sweepstakes-entry/ (http://www.rcindia.org/electric-planes/convertible-scratch-build-for-5th-anniversary-sweepstakes-entry/)