220-250-quad kit with electonics .
wish qk stocks the same again
used one would also work for me ....but it should be in good condition.... :P
Could you please name the parts you are looking?
I have got the full quad build,
ESC, motors, frames, propellers
Spare props, spare motors, cc3d flight controller
And yes everything is brand new
Frame has been assembled once, ESC have been soldered once to test.
Rest all new :)
WhatsApp or pm me
9710207902
@madaquif,
Would you like an ST360?
Regards
I have the following from qk:
1] Cobra CP 2207 2300KV Racing Motor Double Pack x2 (total 4 motors, with original boxes, opened for testing)
http://www.quadkopters.com/product/brushless-motors/cobra-cp-2207-2300kv-racing-motor-double-pack/
2] EMAX 30A BlHeli ESC x4 (heatshrinks removed for better heat dissipation)
http://www.quadkopters.com/product/30a/emax-30a-blheli-esc/
3] SP Racing Flight Controller Acro (90 degree pins soldered)
http://www.quadkopters.com/product/flight-controllers/sp-racing-flight-controller-acro/
4] Power Distribution board 100A
http://www.quadkopters.com/product/flight-controllers/power-distribution-board-100a/
Everything except the motors is used and working great. I also have a custom laser cut aluminum+mdf 250 frame. I'll throw in all the 5" and 6" props I have for free. I can post pictures if you want. Let me know if you are interested and we'll talk about the prices.
hello dear fliers...
thanks for your responses...
@ rahulandy27 I will contact you via phone.
@ iyer sir...I already have a st360.... :D ...
@ swapnil I will contact you via phone.... plz share your phone number
Pictures as requested.
1] Cobra CP 2207 2300KV Racing Motors x 4
2] SP Racing Flight Controller Acro + case + cables
3] EMAX 30A BlHeli ESC x 4 (attached to the custom frame)
The wires are soldered to the 100A PDB and the signal wires are re-configured for the SP Racing FC.
4] Custom 250 frame with 13mm aluminum booms with laser-cut MDF main plate and FC mount plate. The motor mount arms are 4mm thick laser-cut acrylic for 22 size motors. This is a very rigid frame but weighs only about 115 grams.
5] I also have 3 sets (total 12) of HQ 5X3.5X3 props new in pack. These are low noise props due to their low pitch and bull-nose shape.
Have following NIB -
4 pcs 1806 2280KV motors ,
4pcs Emax 12 amp esc,
CC3D flight controller,
2 pair 5060 props
In esc you have the option of either 4pcs BLheli or SimonK firmware NIB
Whatsapp me @ 9810209995 for details.
Bump..m still looking for a mini quad
Check PM
I have emax rs2205s motors, emax blheli 40a ESCs, and cc3d flight controller.
pls pm if you want.
I have the following:
- Lumenier RX2206-11 2350KV MOTOR x4
- Racerstar RS20Ax4 (4 in 1) 20A ESC
- SP Racing F3 Flight Controller with Mini NZ GPS
- ZMR250 250mm frame (Glass fibre)
- PDB w/ LC/+5v/12v BEC
All new and unused
PM me if you are interested.
hi,
i have zmr250 with Emax 2204 motor esc and Naze 32 10DOF.
Currently flying and good condition.
Manpreet
9599382710