Need props for my quad. 2 blade,3 blade anything will do.
Ashim.
I have it....
Edit: sry 6x4.5 3 blade red color 4 props, available
You can find them @
http://www.quadkopters.com/product/5030-gemfan-propeller-green/ (http://www.quadkopters.com/product/5030-gemfan-propeller-green/)
http://www.quadkopters.com/product/5030-gemfan-propeller-black/ (http://www.quadkopters.com/product/5030-gemfan-propeller-black/)
@Aeroempire 6x4 wont fit on my quad. Thanks anyway.
@sidewinder already ordered but the quality is a bit disappointing. Was hoping someone could offer something else. Will probably have to order from China.
Ashim.
Quality as in?All nylon and plastic props feel the same to me, however havent used anything else yet. I have used those props from QK and they were allright altho I dislike 3 blade ones, 2 blades are easier to balance.
Another option but I dont expect them to be anything different than the ones at QK.
http://www.muav.in/?wpsc-product=paired-2-blade-propellers-rotating-and-counter-rotating-5030 (http://www.muav.in/?wpsc-product=paired-2-blade-propellers-rotating-and-counter-rotating-5030)
Otherwise you would have to order them from outside India. And in that case I would suggest you getting Carbon Fiber 2 blade props.
Thanks for the link, will give those a try. The Gemfan 5x3 3 blades are just too brittle and disintegrate on impact. As soon as get the hang of flying a quad will go for CF blades. Thanks again.
Ashim.
Try this:
http://www.sp4mm3r.com/propellers-adapters/5030-propellers-red-3xcw-and-3xccw-6pcs-per-bag.html (http://www.sp4mm3r.com/propellers-adapters/5030-propellers-red-3xcw-and-3xccw-6pcs-per-bag.html)
:hatsoff:
Those hubs are so small there is no way to fit on the motor shaft. I know because I ordered them from HK and they are SxxT.
Which motors you are using on your quad?
http://www.rcindia.org/multirotors/poor-man's-blackout-mini-quad/msg184136/#new (http://www.rcindia.org/multirotors/poor-man's-blackout-mini-quad/msg184136/#new)
Ashimda, you might be right about the Gemfan quality, mine have ripped apart in mid air several times.
HobbyKing has similar 3 blade props which are thicker and more durable, but only available in 5*4.5, take a look if it's still available.
5x4.5 would have sufficed but HK is pretty much on back-order for nearly all props.
Ashim.
I have 5030 3 blade props available for sale if interested plz pm me
Regards