I have ordered it from here ;
http://www.quadkopters.com/product/imax-b6-charger/
Buy i need a compatible adapter for thre charger , any ideas from where i can get it ?
just go to any electrical store and ask for a adaptor which outputs 11~18V.....
http://www.ebay.in/itm/Universal-12V-5Amp-60W-AC-DC-Power-Supply-Adapter-Charger-for-PC-LCD-monitor-TV-/280939317090?pt=LH_DefaultDomain_203&hash=item416949c762
will this work fine ?
Yeah... I guess.... But I don't know what port is there on the charger....
Sent from a potato using tapatalk 2
Ignore above... I took a look at it... It does mention that it is for an imax b6 rc charger.... So It should work fine.... Though I would advise you to wait for others to respond....
Sent from a potato using tapatalk 2
Buy a 5A 12V DC adapter from your local Electronics store.
Here is a similar thread http://www.rcindia.org/batteries-and-chargers/feedback-please-lipo-chargers-available-locally/msg130220/#msg130220 (http://www.rcindia.org/batteries-and-chargers/feedback-please-lipo-chargers-available-locally/msg130220/#msg130220)
Cheers!
check your local electronic market, i got it for less than 300
have brought the imax b6 from rc bharat http://www.rcbharat.com/battery-chargers/64-imax-b6-charger-discharger-1-6-cells-genuine.html dont know how to charge my lipo batterys all are 2S... 260mah,450mah,800mah,1300mah the problem is all have jst connecters
hi every one
I have a imax b6 charger ,when I connect it by ac adapter (5 amp. 12 volt) or extention dc chord it gives smell and smoke .please give me advise why this happend.when i comnnect it its original short connecter it works fine .difficulties is here that it does not have any cigrette lighter adopter so always open car bonnet. any solution welcome.
with regards
arvind khare
did you check the polarity. Because imax b6 clones do not have reverse polarity protection, Original does.
yes center pin positive and outer is negative,issue is why its get hot when it connect by extention wire or adopter .