PLEASE help guys I want bearings for NTM propdrive 28-30s motors its really urgent please help??!!
Please help guys??!!
1. Remove the defective bearing
2. Measure the ID, OD, and height of the bearing
3. RCB have some bearings in stock. See if the one you want is available
4. If that doesn't work, find a friend in Bombay. Ask him to go to Nagdevi Street. All sizes of miniature bearings are available there
Hobby King also sells these
upper bearing od 7mm
lower bearing od 8mm
shaft or id of both is 3mm
and BE EXTREMELY carefull while removing them from the motor , you may damage the winding
Does any one have them or get them pm me I will pay
i think you can even take it out from your old motors for the time being .
Can anyone arrange??
Roshan ill try to search in local bearings shop. Pm me the size and quantity.
7x3 I need 6 bearings!
So many people have given you good advice, yet you persist on searching for the easiest way out.
Quote from: sanjayrai55 on May 20, 2014, 10:54:32 AM
So many people have given you good advice, yet you persist on searching for the easiest way out.
lol
8x4x3 bearing is available but it didn't fit my motor!! So am asking. (sanjayrai55) without knowing my problem you are blaming me!!??!
8 mm must fit i can bet on it , although may be you have 4 mm width it will come out 1 mm as i think the exact specification is 8x3x3
Do you have 8x3x3 bearings?? Vineet??
i have few only ,you required 6 ,let me check give me sometime
Sorry vineet dimensions are 7x3x3!
i have some 7x3x3 , how many do you need?
VINEET PM me price please