Print Page - Motors for hex

Title: Motors for hex
Post by: Rahulvyas on March 18, 2013, 01:51:33 PM

Hello guys,
looking for 6 of one of these motors-
1)DT700
2)NTM prop drive

Or any other suitable motors. Just PM me with details if you have new ones available.

Also where do I buy - 13x13x 400mm or similar size(but same length or larger) aluminum square tubes in India?

-Rahul

Title: Re: Motors for hex
Post by: Adityaamg on March 18, 2013, 02:21:35 PM

better to go with ntm motors, they are a bit more pricey but are much more reliable

Title: Re: Motors for hex
Post by: allthatido on March 18, 2013, 02:39:19 PM

NTM has received a lot of bad reviews. You can use dt700's for the hex but they are not exactly state of the art.

I would suggest using 'AX-2810Q 750KV Outrunner Brushless Motor' or 'NX-4006-530kv Brushless Quadcopter Motor' both available at hobby king.

They are relatively expensive but have good performance.

Title: Re: Motors for hex
Post by: Rahulvyas on March 18, 2013, 02:50:21 PM

Pretty costly....but I heard good reviews about AX 750kv. 17$ motor good.
Where can I buy those?

And you design logos? :D illustrator?

Title: Re: Motors for hex
Post by: allthatido on March 18, 2013, 03:00:30 PM

Both motors are available at hobbyking. Yes i design a lot of things in illustrator cs6 :)

Title: Re: Motors for hex
Post by: Rahulvyas on March 18, 2013, 09:32:02 PM

hmm thanks ankur.. I also am a ex-graphic designer (freelancer) but left it due to studies :)

RC India

RC Baazar => Wanted => Topic started by: Rahulvyas on March 18, 2013, 01:51:33 PM