Print Page - Need Nylon M2 screws, nuts, and spacers

Title: Need Nylon M2 screws, nuts, and spacers
Post by: Gulzaar on July 29, 2015, 07:20:33 PM

I've got M3s but they don't fit my board camera on my ZMR250. I will need M2 - anyone have them? Thanks!

Title: Re: Need Nylon M2 screws, nuts, and spacers
Post by: gunnu on July 29, 2015, 09:34:37 PM

i have M2.5 X 6 nylon screw.. will they work..
regards

Title: Re: Need Nylon M2 screws, nuts, and spacers
Post by: Gulzaar on July 30, 2015, 09:12:29 AM

Thanks for the offer- I managed to widen the holes a little with a drill and M3 fit now :)

Title: Re: Need Nylon M2 screws, nuts, and spacers
Post by: Hobbysea.com on July 30, 2015, 09:14:13 AM

check here www.hobbysea.com in hardware section

RC India