Print Page - need skysurfer v3 replacement motor or shaft

Title: need skysurfer v3 replacement motor or shaft
Post by: ramarao on October 19, 2014, 06:42:39 PM

hi today tested my skysurfer v3 ..while flying suddenly crashed beacause stock elevaor servo didn't glued properly,so servo came out from glue,and carshed
motor shaft broken.

so iam looking for replacement motor for skysurfer v3 or shaft for N2822 1950kv brushless outrunner

please suggest me suitable motor for skysurfer v3

Thank you
Ramarao.

Title: Re: need skysurfer v3 replacement motor or shaft
Post by: foolsworldus on October 19, 2014, 06:58:37 PM

http://rcmumbai.com/index.php/product/2200kv-outrunner-motor/ (http://rcmumbai.com/index.php/product/2200kv-outrunner-motor/)
http://www.vibranthobbies.com/planes-parts/electric-motors/d2826-6-2200kv-outrunner-motor.html (http://www.vibranthobbies.com/planes-parts/electric-motors/d2826-6-2200kv-outrunner-motor.html)

You may have to upgrade or ESC to 40amps.. the above motors are somewhat overkill.. but give a nice boost..

Title: Re: need skysurfer v3 replacement motor or shaft
Post by: subhashjk0508 on October 19, 2014, 07:19:58 PM

I have d same motor. Pm me if interested!!

Title: Re: need skysurfer v3 replacement motor or shaft
Post by: kplkum on October 19, 2014, 08:57:39 PM

I think shaft is not broken. .open motor base it would be goes inside.

Title: Re: need skysurfer v3 replacement motor or shaft
Post by: ramarao on October 20, 2014, 10:19:55 AM

@subhashjk0508 pm sent ....

Title: Re: need skysurfer v3 replacement motor or shaft
Post by: rustydusty on December 03, 2014, 09:44:54 PM

hi!i am facing the same problem.what solution did u get?please help me also.
thanks.

RC India

RC Baazar => Wanted => Topic started by: ramarao on October 19, 2014, 06:42:39 PM