I am looking for a thunder tiger phoenix ST2 in Bangalore. I dont mind buying a new one but if anyone has a Phoenix which they want to sell off or upgrade from i would like to have a look at it.
Anyone with a used slash 2wd in bangalore also let me know.

You can contact Jayanth from ThrottleRC throttlerc.in  and ask him if he knows anyone.. He may know someone looking to sell off their Slash..
Do you have a budget?

I will do that. My budget is 10k with batteries and charger. I know the slash may not fit in this but worth a try.

So 10k RTR? Including Tx/Rx?
Then Phoenix seems to be the only option... If its only bashing you plan to do, you can look up the 1/16 Slash 4x4.. 15k including 1 NiMH battery.. Quuite a stretch..

Another option is to save up now, and buy a good car later

Yup RTR. I hont have and car related stuff as of now. Does the phoenix come with any tools?

It comes with basic tools like Allen keys (Are the called Allen keys?).. The Hex drivers.. I'm not too sure, so don't take my word for it..
It also comes with the tool for making camber/toe-in adjustments..

They are called 'L' wrenches or allen wrenches or allen keys.I know of no car that comes with hex drivers.What about a 4-way wrench?

And the tool to make camber and toe adjustments is called a 'turnbuckle wrench'.

Learnt this from the manual

Huh I really should go through the manual

Haha yeah you need to read the manual abd put your bx together
The guy at ModelArt is offering 3600mah nimh + charger for 3k. Is this good for the price?

A lipo+charger can be had for 100$.If you've got some relatives coming to India from the states,it would be better.I'm itching to get mine.

but it would be better to ask an existing owner about the size of the battery tray and get a lipo accordingly.

Or you can get a LiPo that's suited for the Associated RC10T3.. They are the exact same model.. The battery that fits in a T3 will fit in an ST2..

Hey i was asking if 3600mah nimh + charger is worth. Will i be able to get a similar nimh battery + charger for cheaper elsewhere?

I would say its not worth it when you have a good lipo within striking distance from HK.I think you already have a charger.Am I right?

Yup i have a lipo charger. Iv done some reading and everyone say "i bought a lipo, im never going back to nimh"

So il get the lipo from HK i guess. 20C will be sufficient right?

Hardcase packs:
ZIPPY Flightmax 4000mAh 2S1P 20C hardcase pack @ $17 and 265 gms. Dimensions: 137x46x25mm
ZIPPY Flightmax 5000mAh 2S1P 20C hardcase pack @ $21 and 310gms. Dimensions: 137x46x25mm

Normal packs:
ZIPPY Flightmax 5000mAh 2S1P 20C  @  $17 and 250gms.  144x51x17mm
Turnigy 5000mAh 2S 20C Lipo Pack   @ #16 and 368gms.  148 x 49 x 16mm (118 gms more!!!!!!!!!!!!!!)

Hey on hk there are two options - lipo and car hardcase lipo. Is there and difference between a hardcase lipo in the normal section and a hardcase in the car lipo section?

Should do.Discharge rate?Still,just make sure it fits.IMO,a 4000 mah pack should fit.

Not a chance! In the manual, the brushed version's ESC claims to be 200A continous.. Even I was shocked to read this..  

The hardcase simply protects the battery.. Otherwise, in a big crash, the LiPo might get punctured.. Try your best to get a Hardcase..

I think Ajo sir has been using softcase packs for quite some time.. Any comments, sir?

Woah so il need 5000mah 40c minimum?

Rather than the ESC it depends on the motor right? The esc can handle 200A but it doesn mean the motor will pull so much current.

Yeah.. Even the Slash 4x4 ESC is rated for 200A.. But, people get away with 5000MaH 20c batteries because the motor doesn't pull so many Amps..

So il get the 20c itself? To be safer i think il get the 30C pack.

Rajat,the ST has a smaller compartment.5000 mah 2s 40C is the IDEAL setup for all 1/10 cars.30C is safe and 20C is manageable.Now,coming to the ST,I'm not sure the battery compartment is big enough to hold a 5000 mah pack.Just check the dimensions before you buy a lipo.

Hardcase packs:
Turnigy 5000mAh 2S 30C hardcase pack $23 400gms dimension 139 x 46 x 26mm
Turnigy 4000mAh 2S 30C hardcase pack $18.5 350gms dimension 134 x 44 x 22mm
ZIPPY Flightmax 4000mAh 2S1P 30C hardcase pack $21 dimension 137x51x24mm

normal packs:
 Turnigy 4000mAh 2S 30C Lipo Pack $16.25 324gms dimension 143 x 49 x 14mm

I have listed rates of 20 c , 30 c so next 40 c Not able to get the dimensions. Hope Divyan finds it on the box or manual , or measures it himself

I would vote for a hardcase anyday.Now,a TT Phoenix ST owner should verify the size.Divyam,could you give us the size of the battery compartment on your BX?It should be similar.

PS:we're on the same frequency

I'll try and give it by evening... REALLY busy right now

tray dimensions on my phoenix ST 2

can take a max of
length - 170mm without the foam piece
width - 45mm. 2mm more if u remove the foam lining on the sides.
height - 25mm stock. one side is adjustable. so shld be able to fit slightly taller batts. maybe upto 28 or 30mm with a tight fit.

and a hard case wld be better. but since this is protected from 3 sides. even a softcase might work

and 200A??? damn. my e-maxx BL with a mamba is rated at 120A.