We would be launching soon : ROHIT a Balsa Beginners KIT designed and manufactured by Mr Madhav Khare from Pune .
This is part of our initiative to build and develop local technical talent and jointly evolve products like we did for the Quad by Nandakumar.
The Kit is built is the good old style of Balsa Building with rib construction for the wing and balsa fuse construction. Covering has two variants covering film and tracing paper. This is a real treat in terms of Kit building
The set up is :
1) Balsa Kit : 3 and 4 Channel version with Plans ( Price will be Rs 2500 + courier )
2) I Flight Motor 2205 ( 1400 KV for tractor and 2840 KV for Pusher )
3) ESC : RCFORALL 20 Amps
4) Battery RCFORALL 7.4 v 1300 mah
5) Prop : 9050 ( tractor and 5 x 5 for pusher )
6) Servo : RCFORALL 9 gms
The original Kit is a 3 channel Rudder-Elevator Version ( photo below dark blue with yellow poly's)
We have modified and advance versions which can built from the original Kit :
1) 3 Channel rudder elevator with dihedral instead of Poly's
2) 4 channel Polyhydral Aileron version with reduced poly angles
3) 4 channel dihedral aileron version tractor
4) 4 Channel dihedral pusher
5) 3 channel Aileron elevator version with fixed vertical stab dihedral version
We will be launching combo's of Rohit shortly .
Here are some photos
Video of the Pusher version :
Sai