Dear All,
This is my first post. I am new to RC Flying and want to get into it seriously.
I just bought a Multiplex Easy Star 2 RR along with a JR XG8 controller, temp sensor, altitude sensor, battery charger etc...
I have put all the things together as per the instructions. Aileron servos added and push rods connected. Rudder, throttle and elevators are working fine. There is only one socket for "AILE" on the JR Reciver, but since there are two ailerons (left wing and right wing), which one do i put in the "AILE" socket? Do i put the other Aileron plug into AUX1/AUX2?
Also, for newbies, I have been told that i should not use the ailerons...so should i just disconnect those 2 plugs from the receiver? (As shown in the pic) and only fly with rudder, elevators and throttle?
Please take a look at my set up....Please advise me if there is anything wrong with my set up....i AM DYING TO take it flying, but I want to make sure nothing is wrong..
How do I set up this receiver inside the cockpit? Someone was saying that one wire has to be straight and the other at 90 degree angle?
Thanks for the help in advance.
A confused enthusiast.