hai iam seethal joseph frm cochin kerala,
iam a just biggner in the rc field, can u help me i have brought a HK450 V2 CCPM 3d kitt frm Hobbyking.com
And turnigy 9x 2.4ghz TR/Rx 8ch receiver (v2)
Can u help me to setup the radio
will u give me details of how to connect the servos,esc,gyro,motor to the 8 ch Reciver
Mention
1
2
3
4
5
6
i have no idea,
and Pls give me normal setup for heli to fly settings to do in that radio ?
pitch/curves/ i dnt know abt this i have search over web/ but not getting idea/
can u help me with sm basics
waiting for ur valuable replay pls give me ur  no
my no is 9995444608 or mail me seethalmj@gmail.com

Welcome to RC (India)

You have a LOT of reading to do !  There are multiple build threads on this forum on how to proceed with building a 450 size heli.  Go through ALL the search results on the first page for the below search query as a start.

http://www.rcindia.org/search2?search=450+heli+build   

I hate to say it, but do not expect people to repeat information that has been posted many times before, just become some just joined and asked for it again.  It just does not make sense. 

If you are still stuck after doing your own searching and reading, by all means ask specific questions, and everyone will be happy to help.  But you need to figure out the bare basics on your own.

Lots of beginners have built their 450 helis using information available on this forum (and other online resources), and I am sure you can do it too.  Looking forward to your build

@ heliboycochin
this may help you out
http://rctech.blogspot.in/2011/03/turnigy-imax-9x-tx-hk-450-setup.html

hai iam seethal joseph frm cochin kerala,
iam a just biggner in the rc field, can u help me i have brought a HK450 V2 CCPM 3d kitt frm Hobbyking.com
And turnigy 9x 2.4ghz TR/Rx 8ch receiver (v2)

How I center all servo to 90 degree.
Can I do it with the above radio ??
Pls friends help me.
I am almost assamble the body.

Need to setup servos, if I get idea for centering to 90.
Pls help to centering
Thanks

[Admin Note] Please do NOT post in all capital letters.

It depends on how to put the servo arm.

best way would be to connect the servos, adjust trim and then put servo arms.

hope this clarifies..

It would help you a lot if you check the CCPM part 1 and 2 videos from Finless

http://www.helifreak.com/showthread.php?t=11373

Also check the 101 videos
http://www.helifreak.com/showthread.php?t=41692

i shuld adjust trim settings in radio and then connec to servos
then it woould be center and that we can put servo arm
thats all if it ok

Hai pls give me a best biggnr settings for this radio
and sm biggner heli flying ideas ,
And
servos Connection To
turnigy 8C receiver and 450 heli servo , ESC, Mottor, Gyro connections
Any diagram ?? no idea of that
pls help

hobbyking hk-ssh50a to turnigy typhoon 2215 motor wiring diagram
how to connect
all 3 r black wire mention A B C

Motor wire is BLACK RED And BLUE
pls tell hw to connect

Heliboy, Connect any wire of motors to any wires coming out from esc.
Means u can connect wires without the color code. just spin the motor , and if it spin in opposite direction, just interchange any two wires and u will get the correct rotation.

First of all, have you seen the videos recommended in Reply #5 ?

I Have assamble , all, things, motors, esc gyros,servos,
centered servos, with help of sm members in this fourm thanks every one ,,,
but whn i throttle up ,my Turnigy thx9 the heli motor will start and all will wrk but heli is not up/////
i dnt know to settup actual throttle pitch / pls help me
no idea hw to setup, adjust linkage, pitch adjustments i adjust in radio but no..hope
whn i pull up throttle in full, the Mail blade just only trun , not even 20 degrees..
so wht to do pls help...
thanks

Hi, Is it possible for you to make a small video showing the issues?

First of all, remove the main blades, until you can get the motor to reliable go from idle to full speed as you increase throttle from 0 to full.  If you cannot get the motor to do this, PLEASE do not put the main blades on. Getting the motor and main rotor to go from 0 to full together is a starting point in heli setup.

But from your description, you have confused the audience.  At one point you say "the motor will start and all will work", and down the line you say the "main blades just only turn, not even 20 degrees".  So which one is it ?  Does the motor really work at high throttle ?

A video would be very good at this point.  If you cannot manage that, please take your time, and post the symptoms in enough detail so that people can diagnose.  Take your time... go slow...  But list the problems and symptoms clearly and concisely.

I agree with Anwar sir, a video with definately help,

However make sure

1.  that the main blades are turning in clock wise direction when seen from the top and the tail blades are moving in clock wise direction when seen from left hand side (tail pointing at you) if this is not happing then just swap any2 wires to fix this issue.

2. A heli needs very less pitch moves like around 5 degrees of pitch to hover so you will not see 20 degree movement on Heli.

i tried so much ..but no idea..
i need to sale my hk 450 with turnigy thx9 transmiter and need to take ready tofly..
but i dnt recomended to biggners..
all r assambled , but need sm allingments, and settings..
i dnt know how .... so if any body intrest i will give in resonable price
i have buy total for 16k including battery n charger ..shipping extra
if anybody need pls inform me
thanks

RTF available @ 10k http://rcbazaar.com/products/876-450-v2-ready-to-fly-with-transmitter-lipo-charger.aspx

You are giving up too early, and without reason.

The main mistake you are making again and again is that you are not providing proper responses to the requests/questions by the members here who are trying to help.

I will be in Kochi some time between 4th and 10th of July (and again multiple times till end of August) if you want to meet in person. 

In the mean time, I suggest you go through posts directed at you, and try to answer "to the point" ! Lots of beginners here have got these helis and built them, they just took it one step at a time following instructions and communicating back.

sorry sir, i think its problem with mt trunigy thx9,
any way.. i shuld meet u personaly, pls inform me whn u arrive hear, i will cm
need sm help.
thanks u for..helping me..

dear heliboycochin

please check the manual i email you. it should help.

I ( many others on the forum too) completed this heli
, with the help of our forum members, Internet etc:,
Don't give up sheetal , you can do it, all the best

+1 to santhosh,
heliboycochin, to start RC, i got the 450 heli RTF. I was new to RC leave alone heli. Believe me i didn't even know how to switch it on. If you are telling RTF is good, think again, i crashed it within few weeks and i had to learn all the abc to fix them.  Takes some time and patience that's it. I don't know if anyone has suggested, but there are series or video made by sujju sir (one of the forum veteran and expert in helis), Please search the forum for hiller 450v2 build series. Watch them, They have information on how to build and and setup the electronics including the pitch curves and throttle curves etc...

Don't give up, its not rocket science , just takes some time

even i crashed day before yesterday
but i love to fly it
so ordered spares

At last my heli hk 450 just fly n up/
thanks for all for support /////
but heli is verry shivering, and sm problems, that bi need shuld chk by a good professional heli person
iam waiting anver sir to arrive in kerala/
thanks for all support friends, iam happy nw
and nw iam full time on \SIM.. ENJOYING FLYING..
its good..realy intresting..learning hovering..
difficult..but nw aftr 3 days..it cms to my hand......

Dear heliboycochin !

Good to hear this. I am sure your trip to Coimbatore helped you a lot.