Hello all
well i'm making a completely scratch built cessna 182 from dblums plans
i scaled downed the plan to 30% because i want a smaller model (though i regret it now :banghead: )
i fit the following motor and esc in the model
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8140
and
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11429
the overall weight of model with motor and esc is around 70-80gm
now i want to go for 3s power system but confused which battery should i use :headscratch:
the battery compartment in model is 75mmx40mm(strictly)
plz help me :help: :help:
here are few pics of my incomplete model
you can go for these two batteries.
http://www.hobbyking.com/hobbyking/store/__9173__Turnigy_800mAh_3S_20C_Lipo_Pack.html
http://www.hobbyking.com/hobbyking/store/__9163__Turnigy_1000mAh_3S_20C_Lipo_Pack.html
thanks but i'm looking for nanotech batteries
Check this batteries
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=102_94&products_id=788
they are out of stock but you can speak to store about new stock.
these are better or equal to nano-tech batteries.
http://www.hobbyking.com/hobbyking/store/__18203__Turnigy_nano_tech_850mAh_3S_45_90C_Lipo_Pack.html (http://www.hobbyking.com/hobbyking/store/__18203__Turnigy_nano_tech_850mAh_3S_45_90C_Lipo_Pack.html)
http://www.hobbyking.com/hobbyking/store/__21332__ZIPPY_Compact_850mAh_3S_25C_Lipo_Pack.html (http://www.hobbyking.com/hobbyking/store/__21332__ZIPPY_Compact_850mAh_3S_25C_Lipo_Pack.html)
http://www.hobbyking.com/hobbyking/store/__20389__Turnigy_nano_tech_950mah_3S_25_50C_Lipo_Pack.html (http://www.hobbyking.com/hobbyking/store/__20389__Turnigy_nano_tech_950mah_3S_25_50C_Lipo_Pack.html)
http://www.hobbyking.com/hobbyking/store/__18205__Turnigy_nano_tech_1000mAh_3S_45_90C_Lipo_Pack.html (http://www.hobbyking.com/hobbyking/store/__18205__Turnigy_nano_tech_1000mAh_3S_45_90C_Lipo_Pack.html)
I think you should go for the nano 950 or 1000
use a buddy code
Well rcnitesh i was also thinking about same
Thanks for your reply buddy :)
It seems your model is way too overpowered for its small size. Try going for a lighter motor with a lower thrust. Your model is as it is much smaller than the actual plans. And also try using a 2S setup for the same.
Regards
Overpowered :o :o
All these days i was thinking that it is underpowered :( :(
Are you sure ???
My plane's lenght is 30 cms. While its wingspan is 48 cms.
The full scale one was designed to be used with a CD-Rom Motor. So you should scale down accordingly.
Yeh i saw that but it was rewound accordingly
I myself made one. It was quiet powerful though
Can you tell me what will happen with overpowered setup ??
Low flight times. I don't think the structure is designed for such loads etc.
Thank you for your replies sir
Next time i will ask you before choosing a motor !!
Regards