hey can any 1 tell me......whether the following setupwill..work or. ...not
1) ZIPPY Flightmax 2200mAh 3S1P / 3 Cell /
11.1V 40C Constant / 50C Burst
2)Walkera 30A ESC (wk wst-30A)
3) Mystery A2212-6 2200KV Brushless
Outrunner
4)6x4 Apc Electric Prop
main concern is dat.......c rating of battery is high....plz rply.....
What is AUW of model?
C rating of Lipo will not be a problem..
A pusher setup with, 40-50 inch span will suit your electronics
............my auw.....is700gms
A Higher C rating is never a problem.
It's always the Final Consumer of electricity (Motor in this case) which decides how much amps it's going to consume.
A very simple example: The electricity in your home wall socket is coming from a 800+ Amps Power source (Local Transformer in your locality) and you still can easily connect a 0.1 Amps Mobile charger in the same wall socket. All because the mobile charger consumes only 0.1 Amps and never more than that.
Quote from: IndianHobbyShop on July 02, 2014, 08:04:38 PM
A Higher C rating is never a problem.
It's always the Final Consumer of electricity (Motor in this case) which decides how much amps it's going to consume.
A very simple example: The electricity in your home wall socket is coming from a 800+ Amps Power source (Local Transformer in your locality) and you still can easily connect a 0.1 Amps Mobile charger in the same wall socket. All because the mobile charger consumes only 0.1 Amps and never more than that.
thanx sir guiding me......u knw waht......u r the best.....every terms....in scenes of price or wahtever.....in ebay......u wer d 1st....frm which i bought the items.........keep it up seniore
You're welcome Sahil :)