hi to all member
i m facing the problem with my Futaba 6exap. when i connect the sim cable to PC the indicator on Cable dongle start blinking and then i connect the transmetter.
i m not able to calibrate the controls
i m using aerofly professional Deleux
help me
Is the sim detected by aerofly at all ? Or is the problem only with calibration ?
Make sure you have chosen a model with PPM as the transmission type.
anwarbhai
i just connected the usb dongle, my computer shows the PPM game controller but the aerofly dosnt show the transmetter
what should i do?
If your model is set to PPM in the radio, I am out of ideas :(
Please seek local help. I assume you have ruled out simple issues like loose contacts in the plugs/pins etc by jiggling them.
have u solved this?
i connected the dongle through the four port USB hub, for some reason on the mother PC it ain't working, through the hub? works like a charm, Futaba, Hk Hirobo all of'em
wingco sir,should I change any mode or simply connect and calibrate?
PPM, works good for me
My problem has been solved by Vishvesh :thumbsup: ..I was not plugged in the square plug fully in the tx.. ;D
Quote from: anwar on January 30, 2010, 10:05:45 PM
I assume you have ruled out simple issues like loose contacts in the plugs/pins etc by jiggling them.
So this was the issue !
:giggle: :giggle: :giggle: :giggle: :giggle:
@xxkrishxx: i spell my name " VISHVESH" .... why do people pronounce it wrong or write it wrong....???? :banghead: :banghead: