Hi. I have a HK Bixler 1.1. One of the aileron servo stopped working so i replaced it with a Turnigy 9g servo. However now both the ailerons move in the same direction.. Plz help. I have a Flysky 6 channel TX and the bixler was an RTF mode 2.
just flip the servo arm and servo iteslf.... :giggle: :giggle:
doesnt work. Already tried that. :-\
post a pic it would be easier for us.
Either get yourself a servo reverser (http://www.hobbyking.com/hobbyking/store/__17033__Turnigy_Servo_Signal_Reverser.html) or do it yourself (http://www.youtube.com/watch?v=4n1ec2w21pA#ws) with some soldering.
Before the servo replacement there wasn't a servo reverser. So why now ? Would like to know what you meant by using a soldering iron
flipping the servo wiil work - use your logic
suppose four corners of servo looking from top with the output shaft away from you
are A,B,C,D clockwise
now flip in such a way that B will come to position D
if you are using 1 channel for every servo, reverse the servo from TX . use Flysky manual.
Ashok.P
i fixed it. Thanks for your help :D