Hey,
I know that I have a habit of abandoning build threads but I am gonna stick to this one. I am going to build a bush style avispad with custom flaps and some scale features similar to those of pc6 porters.
Got 3 4x1 feet vinyls for 120 bucks.
And got 3and4 mm corro 6x4 for rs 100 and 180 respectively.
started the wing.
Images coming soon.
they are not getting posted
will post on image sharing website
Placed order on rc bazaar yesterday . today will order from hobbyking(testing my luck :D :D :D :D)
(http://s29.postimg.org/wxircjzeb/20150926_201832.jpg) (http://postimg.org/image/wxircjzeb/)
(http://s29.postimg.org/bml78ah9v/20150926_201943.jpg) (http://postimg.org/image/bml78ah9v/)
(http://s29.postimg.org/92u5rxj3n/20150926_202007.jpg) (http://postimg.org/image/92u5rxj3n/)
(http://s29.postimg.org/64x6y8bg3/20150928_100049.jpg) (http://postimg.org/image/64x6y8bg3/)
(http://s29.postimg.org/bzh6s7oxf/20150928_100125.jpg) (http://postimg.org/image/bzh6s7oxf/)
(http://s29.postimg.org/6674rnd9v/20150928_100112.jpg) (http://postimg.org/image/6674rnd9v/)
(http://s29.postimg.org/84dspn5rn/20150928_100141.jpg) (http://postimg.org/image/84dspn5rn/)
(http://s29.postimg.org/d5ps4r2lv/20150928_100153.jpg) (http://postimg.org/image/d5ps4r2lv/)
(http://s29.postimg.org/ppbq10c1f/20150928_100134.jpg) (http://postimg.org/image/ppbq10c1f/)
no comments??
Its on the way.
All the best friend
Thanks. Waiting forthe stuff from rc bazaar so as to fold the wing and drill holes in motor mount.
recieved the stuff .
will be posting images soon
Are you putting flaps? They are not really needed
Check some of my builds - you need a piece of ply glued under the corro for the servo mounting screws to grip
Yes sir,
I have the ply pieces cut.
I will attach them today.
placed order on hobbyking with registered air mail.
i think it is normal for tracking to get updated after 7- 10 days.
wing weight is 325.gms
auw is coming around 1200 gms.
allright?
Upper limit
he he! ;D ;D ;D
next time, ill fill the wings with helium!
progress is on. everything almost completed!
pushrods and rudder left!!
Maid. tomorrow. I am having a nervous breakdown that the plane will crash!
is elevator flutter fine on high throttle?
No control surface flutter is acceptable. Please reinforce these. You could use bamboo skewers or CF rod/Tube
Further, trim the corners at a 45 degree angle
no sir not that way!
the whole elevator (incl. the part that do not move)rocks right and left at more than 3/4 throttle.
Hey prabal. Nice build!
Waiti.ng to see video
Quote from: prabal276 on October 26, 2015, 06:34:35 PM
no sir not that way!
the whole elevator (incl. the part that do not move)rocks right and left at more than 3/4 throttle.
A little bit of vibration is fine. You can clearly see the same happening below (Just before hand launch):
http://www.youtube.com/watch?v=rASh0gA3fYc
And I fly that plane pretty fast. Never faced any control loss at high speeds (which happens when the surface flutters)
Ill fly it low and slow
Every thing except rudder and back covering completed
Have you put flaps as well ?
regds
Saurabh
Yes i have.
Good advance flying
@ maahinberi
Yes sir,
it just flutters a bit more!
you see, my motor is a 3536 1100 kv
Crashed it.
It was too fast even on half throttle with flaps fully deployed.
would have handled it but ailerons were not trimmed.
Just a new prop and some formers to replace and put landing gears back on.
it was as fast as maahin sir's avisport
Its good you tried to maiden it yourself. That's how you learn and become better
Yes sir.
will try to repair it and bring it to sec 29 this or next saturday.
just some wooden pieces to replace.
i think the problem was with aoleron trims.
The plane was remaidened today!
Sanjay sir flew it for me!
It flew excellent.
He suggested me to add the following to my plane to make it better and stable:
1) Fix the tail wheel clevis to the rudder with the help of a bent plastic peice.
2) Add bolts and nuts to the L.G instd. of self-Tapping screws
3) Fix a 2mm packing under the wing T.E.
Thanks, Sanjay Sir.
Will make the improvements!
Video coming soon!
Yup, do the needful, and the model will give you many happy flights
It's very well built for a first effort. Kudos {:)} {:)}
sir now from where do i get nuts and bolts to mount the lg?
M3 X 25 Allen Bolts - from the bazaar, where else >:D
Sir.
I found out the cause of that jittery sound.
one of the screws that mounted the motor to the motor mounting x was missing and one was loose.
And sir can you share a pic of packing uder the T.E as i am not able to undrstand the setup.
No PIC. Just raise the TE about 2 mm w.r.t. the LE with a piece of packing
I flew it!!!!!!
IT FLEW!
SO awesome and So slow!!!!!
I will post a vid. ASAP
Sanjay sir, this saturday will we be meeting?
OK. 7 am, Sector 29. Please inform Harshil