|
Title: FREE BIRD Post by: rajaram on July 07, 2010, 03:21:23 PM Dear All,
I had a Plane called free Bird which i got it from UAE two years back but did not have any idea of remote controlled planes However After getting guidance from sandeep sir and raj sigma and RC India of course i could start with electric planes and finally with the help of Rajsigma i got My Plane the white one now just came up with the idea to change this 2 channel (free bird) to convert this two channel brushed plane / glider to brushless set up i have the following items with me now 1.8*6 - props 2.18 amps esc 3.motor 1400 -2208 all above items from rc for all 4.3.5 mm gold connectors 5.t connectors 6. 2200 mah 11.1 v trunigy battery all these items from anam funny FURTHER IN LINE to be ordered carbon fiber rods servos I am uploading some pics first is of the plane which rajsigma had built :salute: next is free bird ;D which i am trying to build hope this works please give me some guidance on this guys Title: Re: FREE BIRD Post by: rajaram on July 07, 2010, 03:26:31 PM some more pics
Title: Re: FREE BIRD Post by: sriharishine on July 07, 2010, 05:40:30 PM The First plance looks Awesome, Clean build and I like it a lot. Can you please tell me who built it?
Title: Re: FREE BIRD Post by: rajaram on July 07, 2010, 05:50:15 PM This was built by rajsigma karkala
regards rajaram 09845069090 Title: Re: FREE BIRD Post by: medicineman1987 on July 07, 2010, 06:03:21 PM Reading the title i thought somebody was giving a plane away for free n got all excited :giggle:
Title: Re: FREE BIRD Post by: prateek13 on July 07, 2010, 06:19:18 PM same here!
Title: Re: FREE BIRD Post by: rajaram on July 07, 2010, 07:15:52 PM wing attaching to the fuelsage
Title: Re: FREE BIRD Post by: ujjwaana on July 07, 2010, 10:36:04 PM Hey Rajaram,
I tried to Pimp a similar Chinese plane with a Brush less motor and Futaba Proportional Tx/Rx system. Got the CG totally screwed up. Are you planning to use the Transmitter/Reviver that cam with Free Bird ? ensure that all the channels are proportional. The one I got my Chinese plane only had only Proportional channel (motor speed) and the other was just on-off (Motor differential speed) where one of the motor used to just Stop when Aileron pulled left or right. Title: Re: FREE BIRD Post by: rajaram on July 08, 2010, 08:38:38 AM Hey Rajaram, I tried to Pimp a similar Chinese plane with a Brush less motor and Futaba Proportional Tx/Rx system. Got the CG totally screwed up. Are you planning to use the Transmitter/Reviver that cam with Free Bird ? ensure that all the channels are proportional. The one I got my Chinese plane only had only Proportional channel (motor speed) and the other was just on-off (Motor differential speed) where one of the motor used to just Stop when Aileron pulled left or right. Yes but this one will have only the design but the motor will be single one and the tx rx futaba will be used regards rajaram 09845069090 |