Hi All,
Just finished building my new Bi-Wing
BioPack
4 X9gm servos
1000mah 3s Lipo
30A ESC
9x3.8 prop
Tower Pro Motor I think 2209/18 Delta
total AUW 500Grms
Thanks
Hellyflyer
All the best !!!
i'm not seeing an CF rods. are they there? if not, is there any flexing?
also, did you have to put any right-downward thrust on the motor mount?
Good job! Best of luck for the maiden!
she looks like she'll do okay! Enjoy!
Thanks Guys!
Will post a video of the maiden flight :-)
Finally had a chance to upload the huge video on youtube ...now sharing with everyone..this baby flies really nice
http://www.youtube.com/watch?v=KH8QpjwE2uU&feature=youtu.be
Thanks
Hellyflyer
Beautiful bird and neatly build. Is she a tad tail heavy or am I imagining it? Could you please point a link to the plans?
i wish, i could lay my hands on it, she is 200 times more capable. :) what a beauty
PS
Bi-Wing more popularly known as Biplane, 'Bipe' for short
PPS
VC
it isn't tail heavy, i guess, the down thrust is more than required, as and when the power is opened you can see she bucks down
On such small aircraft, do we actually need the motor to be aligned to the left (err right? ???)and down, or is it ok to mount it straight?
Yeah thanks guys,
I know this bird is a lot more capable but wanted to go slow as this was the maiden flight.
Ideally the motor should be pointed to the right and down but I didn't take the hassle of doing that.
Hey VC just search for 3D Batix foamie Plans and you should find the link to the plans
Hi hellyflyer
Where do you fly?
Good flying {:)} {:)} {:)}