hello all
after the build of my wood rc plane ( haven't flown it yet )
here:http://www.rcindia.org/electric-planes/build-thread-very-first-rc-plane/
i decided to fly a foamy first cause i haven't flown any 3d plane before so fianly i put the electronics in the foamy
electronics are the same as on the wood plane
MOTOR : CF2822 motor
ESC : Turnigy TY -P1 25amps brush less esc
SERVOS : 3* HXT 9OO 9g servos
BATTERY : Rhino 1050mah 3S battery
TX/RX : TURNIGY 9X
follows by pics
thanks
rgs
arjun
few more picks :o
haven't flown it yet
planing to do by this weed !
will post the videos soon
thanks!
this is the same foam we get in local store means thermocol, what about you last plane.
yes it is the same foam (thermocol )
i made this because i can actually learn to fly 3d before flying my wood rc plane
if i crash this foamy, it can be easily repaired but where as if i crash the wood rc plane, it is going to be very hard to repair that !
more over as a begging i should go with easier model first so building this using cheap materials which are easily available
i will be flying the wood one also but little latter
material used - 10mm thermocol and wood-strips
wingspan 29"
length 30"
flying weight = approx 450g
here is a quick video : http://www.youtube.com/watch?v=wYLXSpmRJ2Q
thansk for watching
sorry for the video and audio quality
cause i was using a mobile !
sorry for the poor video and audio quality
was using a mobile cam !!