hola ppl,
heres another addition to my fleet :)
The phoenix Classic EP
(http://lh3.ggpht.com/_qaOYWXXKtME/TTfIj6WkSvI/AAAAAAAAACw/-6enWCUv2-0/s800/2011-01-20%2007.24.28.jpg)
I have a turnigy 2814/6 1250kv motor, plan to use a 3 cell ..
plz suggest a suitable power setup.
hope to maiden in a couple of days
regards
carloz
from where you buy this and how much you pay.
:thumbsup: iron out the covering kote a little, near the leading edge
PS
may be it is the camera and the lighting
Looks great !
What is the weight of the kit alone ?
What is the wingspan ? Or, what is the equivalent nitro size ?
Please do post a picture of the underside of the wings.
thnx all,
bought it from paylessflymore
heres the link
http://paylessflymore.com/proddetail.asp?prod=G2%2FAE%2F0022
hi anwar,
Wingspan.......... 53
Length........... 42
Weight........... 1000gms
will post a pic of underside tomorrow, hopefully a maiden too
any suggestions abt the power setup using the motor i have>
regards
carloz
If you mean this Motor:
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=3887
Then the Motor is good selection and use it with 60Amp ESC and 11x7 or 12x6 Prop. Use the rear (Wire side ) end to mount the motor on the bulk head and use the large Prop adapter which bolts to the Bell (dont put an adapter on the Shaft).
If you have other motor, please send the link as the name is not an exact match in the site.
hi ujjawana,
its not the same motor, the motor i have is a turnigy 2814, i got it from sai, unfortunately havent been able to get the link,
name - A2814/6
lipos - 2-3
RPM/V - 1410 KV
Max. efficiency current --18 - 30 A (>75%)
NoLoad current /10 V -- 2.1 A
Current capacity -- 40 A/60s
i dont have any 4cells and would so prefer to use a 3cell , plz adivce on prop size.
regards
carloz
I have a phoenix classic. Its great plane and here is my thread
http://www.rcindia.org/electric-planes/phoenix-trainer-ep/
hi crazypilot,
thnx for that thread, i hope to maiden mine tomorrow.
regards
carloz