My friend gave me this cheap chinese plane sometime back. Due to the non proportional controls and the weak brushed set up with heavy Nicad batteries, he could never fly this successfully. So he gave me this partly damaged.
The other day, i tried converting it in to a regular Model and in the prcess realised that it is quite tough and time consuming since lot of thinking required to place all the components properly and also accessible. Also not to disturb the CG.
completed the works. now waiting for the maiden.
thanks ashta
some more PICS
Nice plane :)
Kindly post power system and other equipment details etc. Will be helpful to others :thumbsup:
The gear used for conversion.
Motor, Blue baby 1700KV, Hobby city
Prop= 60X30
Esc- 12 A, Hobby city
Servos HXT500, Hobby city
Battery, 650mAH, 3 cell, RCFORALL
Receiver- Assan 2.4 Ghz
AUW= about 290 grams.
Here is another example of conversion from RCPowers. Looks like he used the part from an Airhogs plane like one of these :
http://www.airhogs.com
to build this :
http://www.youtube.com/watch?v=lrFNfMtQg0g
What Tx Rx (2/3 Channel) set up it came to you?
Is this following ?
http://www.bechna.com/shop~online-remote-controlled~prices-vector-pilot-3-channel-remote-control-monster-flying~p-164192~view-comments.html
hi ashta,
can we use the gear you used to convert your chinese plane?