Main Menu

Venom - combat wing

Started by rahulroy31, September 01, 2024, 11:06:33 PM

Previous topic - Next topic

0 Members and 3335 Guests are viewing this topic.

rahulroy31

A @ meter span combat wing... I designed it for speed and agility

This is hotwired out of eps foam and covered with monokote. ... an better alternative to foam covered with tape. The adhering of the monokote without damaging the foam required some experimentation with the iron temperature settings, but very much doable.

Airfoil PW 1211 ..

2207 2300kv quad motor turning a 5x5x3 prop,  2x9gm servos, 30A esc, .. flies with 3S molicell Li-Ion

Superb flyer..

The flight video link...  https://www.youtube.com/watch?v=-PPlx9zcEXA

Happy flying




rahulroy31

here are the dimensions for hotwire cutting of the foam.. i.e The wing blank and the cord of the PW1211 cutting templates

The elevons are 3mm balsa covered with monokote with the dimensions as 1)length = 38cm, 2)tip cord 4.5cm, 3)root cord 1cm.. with a straight taper . They are in addition to the dimensions attached.

krishnaram

Beautiful build!
What is the AUW of this beaut?

rahulroy31

AUW is 575 gms .. out of which bty is 157 gms

There is one correction .. the airfoil is PW 51.. 100% at root and 120% at the tip.. The washout is induced by the larger elevon cord percentage at the tips and the inbuilt reflex with the elevons in-line with the lower surface.

K K Iyer

@krishnaram,

Hi,
You joined this forum in 2012 and posted your first msg today after 12 years!
Wow!

Regards
Moderator

rahulroy31

here is a link to another short flight video..

https://www.youtube.com/watch?v=0SD0DHriVOs

Regards
Rahul

K K Iyer

Quote from: rahulroy31 on October 20, 2024, 10:21:33 PMhere is a link to another short flight video..
Regards
Rahul

Power off performance is great for such an aerobatic model!


rahulroy31

You noticed it  :) . Right... it has a fabulous glide too.. courtesy the low wing loading and low drag ... one of these days I will try and do slope soaring without the prop