Print Page - 6x4 Inch propellors on sky surfer

Title: 6x4 Inch propellors on sky surfer
Post by: maveric on September 18, 2013, 11:38:10 AM

Hi All,

Can I use 6X4" propellers for my Sky Surfer V2.....

My concerns are

1. There are not much clearance margins between the fuselage and propellor

2. Will it over heat the motor

3. How do I fit it into the shaft as it is not locking properly.

Thanks :hatsoff:

Title: Re: 6x4 Inch propellors on sky surfer
Post by: pravesh736 on September 18, 2013, 01:25:21 PM

1. enough clearance is there for a 6 inch to fit
2. run 6 x 3 and go easy on throttle , should not be a problem
3. trim the inside of prop with reamer, etc.
:)

Title: Re: 6x4 Inch propellors on sky surfer
Post by: maveric on September 18, 2013, 03:55:18 PM

Thank you so much...wont reaming the propeller make the hub dia large and over doing it can spoil the hub dia.? is ist recommended?

RC India

RC Equipments => Electric Power => Topic started by: maveric on September 18, 2013, 11:38:10 AM