Unused APM for sale
Price 2000/- plus shipping at actuals
Regards(https://uploads.tapatalk-cdn.com/20181218/3f31e531445c8e8b65f49132f93ed493.jpg)
Sent from my RMX1805 using Tapatalk
Bump
Sent from my RMX1805 using Tapatalk
Still available ?
Quote from: prabhu2420 on December 26, 2018, 11:41:42 PM
Still available ?
Yes very much
Sent from my RMX1805 using Tapatalk
Dear All,
I have made my first cuadcopter using FS-CT6B Transmitter, ECS 30A and Motors 2200Kv, FC-Naze32 rev6
when i go to calibrate my ESCs with following steps:
1. On the transmitter,
2. Increase the throttle maximum
3. plug the ESC wire with CT6B receiver in 3rd channel.
4. plug the battery for power
5. Then decrease the throttle to the minimum..
There is no response from the ESCs, only motor sounds continuously one bip in every second.
When i go to test the motors by moving throttle... then motors are not spinning..
Please help friends
Rajeev
9873524281
Quote from: rajeev kardam on December 27, 2018, 11:14:36 AM
Dear All,
I have made my first cuadcopter using FS-CT6B Transmitter, ECS 30A and Motors 2200Kv, FC-Naze32 rev6
when i go to calibrate my ESCs with following steps:
1. On the transmitter,
2. Increase the throttle maximum
3. plug the ESC wire with CT6B receiver in 3rd channel.
4. plug the battery for power
5. Then decrease the throttle to the minimum..
There is no response from the ESCs, only motor sounds continuously one bip in every second.
When i go to test the motors by moving throttle... then motors are not spinning..
Please help friends
Rajeev
9873524281
Brother you have reached a wrong section of the forum , this is classified section please delete this post and post it in relevent section
Regards
Sent from my RMX1805 using Tapatalk
Still available ?