Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc) 90 Degree one pair
- Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.
Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)
Good upto 3Kg Plane
Rs 1500.00 (for one pair)
Type: 2409-12
Weight:65g
Size:?31*62.0
Output Axis:M3
Current:8.2A/12.7A
BATTERY: 3-4 cells Lipo
KV:1570
Io:1.2A (10V)
Internal resistance:0.065O
Max Efficient Currency:9A
Recommended Working Currency: 7A - 20A ( Efficiency higher than 75% )
PROPELLER: 8x4 APC/9x4.5 APC
ESC with BEC
a. 3 cell Lipo: APC 8*4SF 11100RPM 10V 20A Thrust 805 gram ( Air pressure 76mmHg/25 degree)
b. 3 cell lipo: 9X4.5APC-E 9900RPM 10V 23.8A Thrust 960 gram ( Air pressure 76mmHg/25 degree)
Rs 1500 (for motor, ESC, & prop)
Turningy 3648 - 1450Kv Brushless Motor
Dimension: 36mm x 51mm, 70mm(with shaft)
Weight: 181g (kv1450) (not including connectors)
Diameter of shaft:?strong>F5mm
Length of front shaft:?strong>F19.1mm
Lamination thickness: .2mm
Magnet type: 45SH
Specification:
No. of cells: 3-6S
RPM: 1450kv
Max efficiency current: 45A-50A
No load current: 11.1/4.6A
Current capacity: 70A/20sec
Internal resistance: 0.010ohm
Max performance;
Voltage: 3-6S
Prop: 7x5, EDF90
ESC: 60A
Thrust: 1450-2300g
Power: 1600W
For EDF 1500~1800g model airplane.
Rs 1400
Hobbyking 70Amp ESC
4 to 6 Cell LIPO
Constant Current 70A
Burst Current 80A
No BEC
Rs 1200
Turnigy nano-tech 5000mah 4S 25~50C Lipo Pack
Capacity: 5000mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 25C Constant / 50C Burst
Weight: 523g (including wire, plug & case)
Dimensions: 159x49x33mm
Balance Plug: JST-XH
Discharge Plug: 4mm bullet-connector
UNUSED with original box packing
Rs 2600
Quote from: softlink on July 12, 2015, 10:35:17 AM
Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc) 90 Degree one pair
- Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.
Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)
Good upto 3Kg Plane
Rs 1500.00 (for one pair)
SOLD
SOLD all above items
only available
TowerPro BM2409-12T / 25A BEC / 8x3.8 Prop Combo
I receive my parcel yesterday .nice packing nice items .thanks sir .all items are new and very good condition :hatsoff: :hatsoff:
HEY where is your new thread for ESC NTM MOTORS ECT
DO NOT KNOW HOW YOU MISSED THIS POSTING
TowerPro BM2409-12T / 25A BEC / 8x3.8 Prop Combo
Type: 2409-12
Weight:65g
Size:?31*62.0
Output Axis:M3
Current:8.2A/12.7A
BATTERY: 3-4 cells Lipo
KV:1570
Io:1.2A (10V)
Internal resistance:0.065O
Max Efficient Currency:9A
Recommended Working Currency: 7A - 20A ( Efficiency higher than 75% )
PROPELLER: 8x4 APC/9x4.5 APC
ESC with BEC
a. 3 cell Lipo: APC 8*4SF 11100RPM 10V 20A Thrust 805 gram ( Air pressure 76mmHg/25 degree)
b. 3 cell lipo: 9X4.5APC-E 9900RPM 10V 23.8A Thrust 960 gram ( Air pressure 76mmHg/25 degree)
Rs 1500 (for motor, ESC, & prop)
HobbyKing 30a Blue Series ESC 4 in no
Cont. Current: 30A
Burst Current: 40A
Battery: 2-4 Cell Lipo / 5-12 Cell Ni-XX
SBEC: 5V/ 3A Output
Size: 23*43*6mm
Weight: 28g
Simon K Firmware FLASHED
Rs 800 each
NTM Prop Drive 2826 1200kv motor 4 in no
Model: NTM Prop Drive Series 28-26A 1200kv
Kv: 1200rpm/v
Max current: 17A
Max Power:215W @ 12v (3S) / 286W @ 15v (4S)
Shaft: 3mm
Weight: 57.6g
ESC: 20A
Cell count: 3s~4s Lipoly
Bolt holes: 16mm & 19mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector
Prop Tests:
7x6E - 11.1v - 90W - 8A
7x6E - 14.8v - 192W - 13A
8x4E - 11.1v - 100W - 9A
8x4E - 14.8v - 222W - 15A
8x6E - 11.1v - 145w - 13A
Rs 900 each
HTX900 9g Servo 4 in no
• Plastic Bushing
• 25cm wire
• Coreless motor
• Servo arms & screw included
Size : 21x12x22 mm / 0.74x0.42x0.78 in
Voltage : 3v ~ 6v
Weight: 9g / 0.39oz
Speed : 0.12 sec/60(4.8V)
Torque : 1.6kg-cm
Working Temp : -30C~60C
Gears: Nylon White type
Rs 250 each
KK 2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.6:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Singlecopter 2M 2S
Singlecopter 1M 4S
Rs 1800
i need retracts :headscratch: :headscratch:
i have retracts complete set of two pls let me know ifr you interested my contact no. is 9582766207 will whats you the pictures mint condition