Title: epoxy for DT750 motor. Post by: RAHUL QUADY on October 24, 2015, 08:47:44 PM Hello guys,
Iam going to buy a DT750 motor.I've heard that,most of the people while building a quadcopter or a tricopter , use some kind of epoxy to stick the three wires of the motor.I don't know anything about epox,all I know is that it is some kind of super glue used for RC Aeroplanes.I want to know what kind of epoxy should I have to use in order to prevent any kind of damage to my motor.Please help me!. Title: Re: epoxy for DT750 motor. Post by: Himadri Roy on October 24, 2015, 09:50:22 PM I used araldite quick for sticking the wires when I previously had DT750s. Just make sure you use the right quantity and dont get any of those into the Magnets around!
Title: Re: epoxy for DT750 motor. Post by: K K Iyer on October 24, 2015, 10:15:30 PM As Himadri said, Araldite Clear/Rapid, as in pic 1 (which is not too clear)
Or at least put a common heat shrink on all 3 wires. (Pic 2) The problem arises due to the mounting method. If the grub screws get loose, the motor rotates, playing havoc with the wires... Title: Re: epoxy for DT750 motor. Post by: RAHUL QUADY on October 25, 2015, 10:47:21 AM Thankyou so much guys!!!!!!!!!!!!.But where do I get araldite?,what is the cost of it?.
Title: Re: epoxy for DT750 motor. Post by: Himadri Roy on October 25, 2015, 12:39:20 PM Hadrware Shops. Rs 90 for a 36g packet!
|