Main Menu

Facing trouble with KK2.0

Started by satz flying, July 20, 2013, 03:36:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

satz flying

July 20, 2013, 03:36:21 PM
Hi
Nearly,I have completed a tricopter with KK2.0 board. Now, i am facing a problem in tail motor. Its get ON (starts to rotate) after 50% of throttle given only. I am new to multicopters. Kindly help me out to make my model to fly.

:hatsoff:

Trust yourself

Rahulvyas

#1
July 20, 2013, 05:48:15 PM
so the problem is it should start at from 0% throttle?
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

arun.sreelakam

#2
July 20, 2013, 05:55:47 PM
You should calibrate the esc first to set the throttle range..

Sent from my Canvas using tapatalk 2
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

Rahulvyas

#3
July 20, 2013, 07:15:26 PM
^ @arun sir, it didnt work for me, i calibrated it 10 times!!
What now? plush's are of no use for multirotors
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

arun.sreelakam

#4
July 20, 2013, 07:33:59 PM
It didn't work means? What is the problem right now?
The motors is not starting at the same time?

Sent from my Canvas using tapatalk 2
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

Rahulvyas

#5
July 20, 2013, 07:49:06 PM
for me the motors dont start from 0% throttle, they start at about 50%.
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

Adityaamg

#6
July 20, 2013, 08:36:57 PM
maybe its a firmware issue with your esc.
this was my problem. but it worked out for me after flashing them with simonK.

Rahulvyas

#7
July 20, 2013, 08:37:59 PM
okay thanks
but i think flashing plush 25A to simonk is difficult
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

Adityaamg

#8
July 20, 2013, 08:42:00 PM
hmm hard luck!
i chose ecs(s), whom i could upgrade in the future and that planning saved my ass.

Rahulvyas

#9
July 20, 2013, 09:02:51 PM
hmm :| sad
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

Rahulvyas

#10
July 21, 2013, 09:00:27 AM
Awesome, my problem finally solved.
I re-calibrated the transmitter and it solved the problem. :)
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

Adityaamg

#11
July 21, 2013, 02:48:41 PM
great!

happy flying.

Rahulvyas

#12
July 21, 2013, 03:16:35 PM
thanks its not yet ready to fly :)
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student
Print
Go Up Pages1
User actions