|
Title: Flip32 and SBUS Config Post by: arunlouie on June 12, 2016, 01:43:54 PM I am trying to connect my x8R receiver to my Quad with Flip32 Rev6 board.
Followed the instructions to connect signal lead to 4th channel of the board which act as UART2, and changed settings in cleanflight accordingly. But still I couldn't connect successfully. Am I missing something? Gone through many threads but still not successful. Some says inverted signal cable can make it work, and some says its not required. Can anyone guide me? Title: Re: Flip32 and SBUS Config Post by: Sreeraj on June 12, 2016, 01:57:55 PM Signal Inversion is required to run sbus.
Title: Re: Flip32 and SBUS Config Post by: Himadri Roy on June 12, 2016, 02:19:52 PM (https://oscarliang.com/ctt/uploads/2015/12/sbus-inverter-diagram-schematics.jpg)
Something like this Title: Re: Flip32 and SBUS Config Post by: Sreeraj on June 12, 2016, 02:37:15 PM Yeah, precisely! Do not buy the Frsky inverter. You can build it for a fraction of the price!
Title: Re: Flip32 and SBUS Config Post by: arunlouie on June 13, 2016, 12:36:20 PM Seen this already, just want to re-assure if this can work without the inverted cable.
I will try this. Title: Re: Flip32 and SBUS Config Post by: arunlouie on June 14, 2016, 06:00:47 PM Got the inverted wire soldered, its working now. Total cost just 5rs.
Thank you all :hatsoff: |