Print Page - Hobbywing XRotor 20A ESC, which is + and GND for motor, there is no marking.

Title: Hobbywing XRotor 20A ESC, which is + and GND for motor, there is no marking.
Post by: Inv3nt0r on April 28, 2016, 01:05:23 PM

Hi I have Hobbywing XRotor 20A ESC and Sunnysky 2212-980kv motor. I want to test it but it don't have marking that which is Red or +12V and GND or black. :headscratch:
(http://uploads.tapatalk-cdn.com/20160428/6d7bc9ec1cb1ebf09cf5c9cf476c59a4.jpg)
(http://uploads.tapatalk-cdn.com/20160428/eb1499fee57bf8c2acbd73758136a5fc.jpg)
(http://uploads.tapatalk-cdn.com/20160428/46ab9575518936182d9d8190c28d5f9f.jpg)
Thanks in advance.
Regards

Title: Re: Hobbywing XRotor 20A ESC, which is + and GND for motor, there is no marking.
Post by: vibranthobbies on April 28, 2016, 01:11:15 PM

Nothing to worry about ESC To motor. Any wire to any wire is OK.
After connecting check for rotation of motor. If required change any two wires to reverse the rotation.

BE CORRECT ON POLARITY OF BATTERY TO ESC.

Title: Re: Hobbywing XRotor 20A ESC, which is + and GND for motor, there is no marking.
Post by: Cycloned on April 28, 2016, 02:28:21 PM

It doesn't matter, you can connect any 3 wires anywhere, and change any 2 wires to change rotation direction.

Title: Re: Hobbywing XRotor 20A ESC, which is + and GND for motor, there is no marking.
Post by: Inv3nt0r on April 28, 2016, 03:45:04 PM

Wow, thanks for your replies!! 😊

RC India

RC Models => Multirotors => Topic started by: Inv3nt0r on April 28, 2016, 01:05:23 PM