Title: kk board led stays on for my tricopter and doesnt arms Post by: kay48 on April 09, 2015, 12:40:35 PM Hi,
I am new to the rc world. i started building a tricopter. i have calibrated all the escs one by one by my flysky ct-6 transmitter. then i uploaded the tricopter firmware on to the kk board(black). I made all the connections right. left front motor - M1 right front motor - M2 tail motor - M3 tail servo - M4 aileron, elevator, throttle and rudder to the respected pins on the kkboard now the problem is that when I power the board, the blue led flashes once and then permanently stays on. and just two of the ecs beeps after 1-2 sec. no response from the transmitter, no arming. I tried everything i could. quite frustrated now :banghead: please help.. :help: :help: :help: Title: Re: kk board led stays on for my tricopter and doesnt arms Post by: a3ruz on October 15, 2016, 03:29:39 PM .
Title: Re: kk board led stays on for my tricopter and doesnt arms Post by: PRANAVK09 on October 15, 2016, 11:20:59 PM Try to upload photos and videos of the problem.......
It will help everyone to understand properly. |