http://www.youtube.com/watch?v=d_DuTGOuNrU
the quad vibrates randomly and flips over, sometimes it will generate enough thrust at 80% throttle, sometimes at 40% only
All escs calibrated, motor props are spinning right, acc calibration done and fc properly programmed.
can anyone please help me sort this issue?never had such problem with my previous naza
I could be wrong, but it seems the props are not fitted properly. Naza orientation seems wrong as well.
With the FC pointed forward, the front left prop should be CW.
triple checked this, even i thought it was this issue
Well in your video, at 34sec you can see a CW prop which seems to be on the front right of the FC.
omg you are damn right ashimda, i choose front as black blue arms not blue blue, and thats why i placed the fc in other black blue position
had a lovely flight last night, but broke a prop while landing the quad, the naza keeps flashing red light rapidly now and doesn't generate enough throttle, what can be the issue here?
is your naza lite upgraded to v2 firmware?
no, still running v1
Recalibrate Tx sticks....... that's one of the errors..... or read manual to see other reason for red blinking
how bad was the crash juss recalibrate the naza and try and bro i already told you to check the orientation and props :P when we spoke :p try recalibrating the imu and fly
Roby* your battery is drained, recharge it and it will be fine.
try to calibrate the voltage in naza app. also
hey, the battery was fine, did a flight at an another location, it was fine...
but it wont take off in a park and will do rapid red blinks
maybe theres an underground bunker over here
☺
Please read the manual of naza carefully. Continuous red blinking indicates low voltage. Reset your naza controller to default settings and then reprogram it. For the starters, uncheck the low voltage alert and see if u still get red blinks .
continuous red blinking means low voltage or some other error(calibration or mag. interference)
when i couldn't take off my voltage was 11.7v but the first level protection was set to 11.2
this was some other issue i guess
roby when you said that it is not giving enough thrust thats when i suspected that it can be a voltage issue.
did you calibrated the voltage ? i mean does gaza app and voltmeter both should show the same voltage readings.