Title: Arduino based 4 Channel Rx & Tx Post by: sandeepm on June 12, 2014, 05:12:30 PM Hi,
If anybody interested in making his own 100 mtr distance tx and rx, check out May Month EFY (Electronics For You). the project is based on Arduino and you can control 3 servos and one esc with this. Thanks Sandeep Title: Re: Arduino based 4 Channel Rx & Tx Post by: girishsarwal on June 12, 2014, 10:12:03 PM Nice, just went through it... replacing the 433 Mhz with a Frsky DIY module should be a simple way to extend the range... throwing out ppm
Title: Re: Arduino based 4 Channel Rx & Tx Post by: shadman_alam on June 13, 2014, 01:54:41 AM i had seen rf modules available for arduino specifically (NOT XBEE).. try contacting tenettronics bangalore, they might be able to help you..
Title: Re: Arduino based 4 Channel Rx & Tx Post by: stadsocare on November 28, 2014, 12:53:05 PM Hiiii, Can you upload the details of that EFU copy please
Title: Re: Arduino based 4 Channel Rx & Tx Post by: sooraj.palakkad on November 28, 2014, 01:57:19 PM EFY content is copy write protected, How ever,as this is a perfect solution for beginners with low budget, I will upload the Details from the EFY -
The range of transmitter relys only on the radio module used, A 433 Mhz Transceiver gives 100 to 300 m range, Where as a costly Xbee PRO gives 1.5K range, with antenna mod, even up to 20KM range can be achieved. |