Hi All,
I'm about to pull my hair out here, running out of things to isolate and diagnose! :headscratch: :headscratch: :banghead: :banghead: :banghead: :banghead: :banghead:
Here's the story, and setup. Apologies if this is in the wrong area, Mods feel free to move.
Rx: Hi All,
I'm about to pull my hair out here, running out of things to isolate and diagnose!
Here's the story, and setup. Apologies if this is in the wrong area, Mods feel free to move.
Rx: RC832 (600mw 32ch 5.8ghz from quadkopters.com -600mw kit )
Tx: TS5823 (200mw) and TS832 (600mw) both are from QK but 600mw is from kit
I have a perfect image when using the TS832 setup on my 250mm (but it very heavy for this setup so downgraded to 200mw ts5823), every time it connects quickly and image quality is great. No noticeable signal interference, and it shows the monitor is working well.
When using TS5823 200mw setups in my MiniQuad, i have one of problem
1) Unable to find a signal at all, just white snow on the monitor, occasionally the image *tries* to appear but doesn't come through. Have cycled systematically through all channels/frequencies.
So, any idea what's happening? I'm all out of ideas, and don't understand how i can have a great signal. :help: :help: :help: :help:
Am using similar setup with RC832 set to ch.31 and all dip switches on an old 200mw TS351 in up position (ch.1), some times it doesn't show up, have to recycle power to receiver once or twice to get a signal.
ok thaNks bro. .. will try .. :)
noooo bro... i had checked that.. not working .. :( .. i think this piece has some defect or something else m gonna return or replace this thing