Need 2 Pairs of Male and Female JST connectors for my battery and ESC because im using a DIY Ceiling fan connector which is dangerous and i also used electrical tape through which ive already got an electric current :banghead:
If anyone has them,please feel free to send them as i need them urgently,
Thanks
Priyum
I like your signature line ...
Does it mean what I think it means ?
Saikat - I dont know what you mean but if you mean that, then thats correct :giggle:
Priyum u got current via battery ? ?
@rastsaurabh... even i am wondering the same sir.. Maybe he got it while hijacking the celing fan connector :)
Yes sir i got it when i tried to disconnect the battery from the esc via fan connector,
I urgently need them,because not only does it mean dangerous for me but for others too as it may cause a short ( God Forbid)
Thanks
Edit - So please if someone has them can PM me :banghead: :giggle:
between battery and esc? you don't want to put a xt60?
Sent from a potato using a lamp
@priyum either use a xt60 pair or deans connector.
m suggestion go for xt60 as most batteries have xt60 connectors attached
i wonder how u got current via battery ??
:giggle: :giggle:
Zor ka jhatka....zor se lagaa
I have a custom made battery from the "electrical bazaar" ie karol bagh and it didnt come with connectors,i didnt have anything so i asked my "electricitywala" and he gave me those :((
It doesnt matter which ones,i just need 1 male and 1 female for the battery and esc and one for the charger of the lipo.
Thanks
@priyum what do u mean custom made batteries
I mean i didnt buy them from an LHS or any person,i didnt have the money so i had to go there and tell them my configuration ie
11.1v 3S 1300-1850mah :'(
ohk gr8 and how much did they charge u for that
600 with the charger.
Please if someone has connectors, i need them urgently!
ask rc electro or rchobbyaddict they are in delhi itself
or check it with hobby sea
BUMP
BUMP!
Priyum, What is the discharge rate of your battery? Keep in mind that JST connectors are not equipped to handle large currents.
P.S - I happen to have a pair lying around. If you still think that only a JST connector would suit your requirement, then PM me your address :thumbsup:
Actually it is a custom made one, i got it made from electricity bazaar here in delhi ie Karol bagh, and i dont know the discharge rate,all i know that it is 3s 11.1v 1850mah battery, i would accept any connectors be it jst,xt60 but i need 2 female ones and 1 male one . 1 female and male for battery and esc and other female for a 12v lipo charger.
Why don't you solder some bullets on then? Considering Factor of Safety, 5mm or 5.5mm bullets should be fine...
but how on the battery and the charger :headscratch:
Wouldnt you be having any connectors of any type?
I did not understand your question.
Its this simple, if the current rating of your battery is X amps, use connectors which can handle X+1 amps.
P.S - Posting clear pictures of your 'custom made' battery and charger would go a long way in communicating your requirement better!
I have not seen people using bullets to connect battery to esc :D so to be on a safer side,would you be having any connectors,be of any kind?
Priyum, FYI.
Connectors - 5.5mm bullets.
Well what would be suitable for this?
First is of 12v charger (wires are very thin)
Second of battery (with that fan connector,wire is very thin aswell)
Third of esc (Thicker wires)
How to use the connectors and which ones to use?
The limit with a JST connector is 4amp.
Here is the source - http://www.modelaircraft.org/mag/faq/answers/faq-q104.htm (http://www.modelaircraft.org/mag/faq/answers/faq-q104.htm)
And the pic makes it very clear that you are using a 20A ESC. JST not recommended!
Quote from: aniket210696 on June 08, 2013, 10:04:29 PM
between battery and esc? you don't want to put a xt60?
Sent from a potato using a lamp
Quote from: shauviks on June 08, 2013, 10:49:38 PM
@priyum either use a xt60 pair or deans connector.
m suggestion go for xt60 as most batteries have xt60 connectors attached
;)
So veloci,would you be having some xt60 connectors(2 female's and 1 male) or any other connector suitable for this in those 3 quantities?
http://www.quadkopters.com/product_category/connectors/ or contact ADIBOY on this forum.
veloci the only problem is i cannot buy more stuff online,the only was possible is anyone having in spares who would be able to send them to me :P :D
Both of the above give you an option to make a cash deposit in their respective A/Cs.
BUMP