RC India

RC Baazar => Wanted => Topic started by: anilkunchalaece on August 24, 2017, 01:04:35 PM

Title: looking for components for first Quadcopter build
Post by: anilkunchalaece on August 24, 2017, 01:04:35 PM
Hi All,

I am newbie to the RC world. looking for following components. initially thought about ording them in
Hoobyking but by reading all the other posts i think LHS is best option.
so please let me know if you have want to supply those or having any alternatives.

All up weight for quad will be 2 Kg, with weight to thrust ratio as 1:3
i need 1.5 kg thrust for each motor

1. Motor
    https://hobbyking.com/en_us/turnigy-multistar-2814-700kv-14pole-multi-rotor-outrunner.html
    spec : max current : 23A,
    battery : 4s,
    with 11*4.7 thrust will be 1600 at 100 %

2. EPS
    EPS current rating should be 1.2-1.5 * 23 = 27-34
   A. https://hobbyking.com/en_us/blheli-s-30a-2-6s.html
      with https://hobbyking.com/en_us/turnigy-multistar-esc-programming-card.html
      dont know what is blheli-s and Dshot but will figure it out eventually  :banghead:

   B. https://hobbyking.com/en_us/xsd30a-v2-12fet-design-esc.html
       with https://hobbyking.com/en_us/dys-esc-usb-linker-esc-programmer.html

3. Battery
   max c rating for battery has to be greater than 4*23 = 92 A
   https://hobbyking.com/en_us/multistar-high-capacity-4s-10000mah-multi-rotor-lipo-pack.html
   i think it will give me flight time of min 15 Min (?).
   (i know weight is around 1 kg, didnt i mention that auw is 2 kg's ?  :))

4. Propellers
   https://hobbyking.com/en_us/quanum-carbon-fiber-propeller-11x4-7-cw-ccw-2pcs.html

5. BEC
   https://hobbyking.com/en_us/hobbykingtm-x3-ubec-3-5a-5v.html

6. PDB
   https://hobbyking.com/en_us/drone-power-distribution-board-quad-pdb-x.html

7. 6 ch transmitter
   FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6B Receiver
   https://www.banggood.com/FlySky-FS-i6-2_4G-6CH-AFHDS-RC-Transmitter-With-FS-iA6B-Receiver-p-983537.html?p=OY2106728901201408U4
   (didnt find it in Hobbyking)

8. Didn't selected the FC - I wanted to build  my own   ;D

9. Frame : https://hobbyking.com/en_us/s500-glass-fiber-quadcopter-frame-480mm-integrated-pcb-version.html
   
you can contact me via also

Title: Re: looking for components for first Quadcopter build
Post by: vineet on August 24, 2017, 02:46:01 PM
you can try this site for all components

www.hobbyXyz.com
Title: Re: looking for components for first Quadcopter build
Post by: anilkunchalaece on August 24, 2017, 04:08:18 PM
hi vineet thanks for reply

from motors section the motor which can offer max thrust is (1100 g ) NTM Prop Drive Series 28-30A 750kv / 140w

http://hobbyxyz.com/index.php?route=product/product&path=67_75_83&product_id=117

is it ok for my config ? or am i missing something  ???
Title: Re: looking for components for first Quadcopter build
Post by: vineet on August 24, 2017, 04:11:17 PM
Go for ntm prop drive 1000 kv
Title: Re: looking for components for first Quadcopter build
Post by: anilkunchalaece on August 24, 2017, 04:20:38 PM
vineet,

is there any specific reason why should get that (don't get me wrong, i just want to know the selection criteria for that for newbie like me info like that is always useful  (:|~)

and didn't find any test data for that motor
Title: Re: looking for components for first Quadcopter build
Post by: vineet on August 24, 2017, 04:24:49 PM
personally used it , power full and quality motor .

thanks
Title: Re: looking for components for first Quadcopter build
Post by: anilkunchalaece on August 24, 2017, 04:27:26 PM
Thanks for info.

Any ESC and ESC Programmer ?
Title: Re: looking for components for first Quadcopter build
Post by: vineet on August 24, 2017, 04:50:47 PM
call on the website number 9911363711 for more information and related product.

thankyou
Title: Re: looking for components for first Quadcopter build
Post by: anilkunchalaece on August 24, 2017, 04:56:43 PM
Thanks for info vineet.
Title: Re: looking for components for first Quadcopter build
Post by: jovino on August 24, 2017, 10:42:38 PM
I have dys 2212 920kv motors brand new with bullet connectors .... 850/- each if u r interested let me kn
Title: Re: looking for components for first Quadcopter build
Post by: jovino on August 24, 2017, 10:45:02 PM
Whats app me on 9511805379