Hello Fellow friends
I am looking for the turnigy 2204 motor which is burnt and not usable... i need the outer cover....
i somehow spoilt mine.... Magnets lost the magic...!!!
Why? How?
Magnets are fixed with outrunner by epoxy. How they lost ? I see the prop fixing screws are missing.
Is someone opened the motor and take away magnets ? Then even after taking another one, you may still lose the magnets from new casing. They are very good motors. Check them at hobbysea.com available at 869/-. Similar speed power/weight/KV motor available at RCBazaar but with different dimension and very low stock with less price...
You can try.
Magnets are there but they lost magnetic properties.
As far as I know magnets can only lose their properties through heat, a demagnetising field or shock (for older types of magnets). Has your motor faced any of these? How?
How did they loose the power.They are permanant magnets. They loose power when you heat them.
Yes i removed the c clip and took out the outer rotor.
Then heated outer cover to remove the shaft .... the shaft got removed quite easily with 2 hammer strokes.
and The magnets too lost power !!!! :'(
People later suggested to keep the rotor in Freeze for 6-8 Hours to remove the shaft.
Anyone with a motor outer to spare.... ( burnt motor etc.)
regds
Saurabh
Looks like that's the problem. From the few disassembly videos I have seen, a mallet is advised to remove the shaft. How severely did you heat the motor bell?
But that is unimaginable, Normal heating can't lose the magnetic property of a fixed magnet I think,
I don't know at what temp. a magnet loses it's magnetism though !
2204 shell or 4x4mm Magnets... anyone??