Print Page - Outrunner motor connection broken, can anyone repair it?

Title: Outrunner motor connection broken, can anyone repair it?
Post by: vaibhav27 on August 15, 2015, 11:57:34 PM

I have a outrunner motor whose connection is broken. There are 3 wires(enamel or copper) which are supposed to connect to it and all of them broke.
Can anyone repair it please?

Please PM me your numbers.

Title: Re: Outrunner motor connection broken, can anyone repair it?
Post by: gunnu on August 16, 2015, 12:56:25 AM

yup i can help you with that. but first can you post some pics so that it will be clear to me and others that what exactly happened...

regards

Title: Re: Outrunner motor connection broken, can anyone repair it?
Post by: vaibhav27 on August 16, 2015, 10:33:41 AM

Here they are... The connection has broken.
There are 3 wires which needs to be joined.
The motor works perfectly.

Title: Re: Outrunner motor connection broken, can anyone repair it?
Post by: gunnu on August 16, 2015, 11:00:31 AM

what about other two wires..

Title: Re: Outrunner motor connection broken, can anyone repair it?
Post by: vaibhav27 on August 16, 2015, 11:07:33 AM

They arent visible, but are there.

Title: Re: Outrunner motor connection broken, can anyone repair it?
Post by: rastsaurabh on August 16, 2015, 11:16:12 AM

It will be tough to solder without scraping the near copper wires.

u cannot solder to a wire which is not visible.

post a pic from back .

RC India

RC Baazar => Wanted => Topic started by: vaibhav27 on August 15, 2015, 11:57:34 PM