Print Page - Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted

Title: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 19, 2013, 08:27:53 PM

I need Prop Adapters ( 3.17 mm ) And 10 X 4.5 Props for my quad . was trying to fly mine but it crashed :(

Am looking for 2 complete sets in total . Please hep here

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: spitfire on April 19, 2013, 08:39:06 PM

Many LHS stock these. You can go through http://www.rcindia.org/rc-outlets-and-resellers/mega-list-of-all-rc-outlets-in-india/

Here are few quick links
http://www.quadkopters.com/product_category/propellers/
http://www.rcdhamaka.com/index.php?main_page=index&cPath=104
http://aeroworks.co.in/store/index.php?id_category=25&controller=category

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 19, 2013, 09:32:14 PM

but what about the prop adapter ?

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: arun.sreelakam on April 19, 2013, 10:06:47 PM

Get prop savers instead of adapters you can save your props as well as your motor shaft While crashing.. Avail in Many LHS

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 19, 2013, 10:15:57 PM

prop saver are the one with the rubber band right ? .. i have those , tried flying with those and the moment the throttle reached 70% the rubber snapper in one and other prop just disengaged from the joint .. :P .. not at all trust worthy ..

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: arun.sreelakam on April 19, 2013, 10:21:42 PM

Yes they are not trust worthy.. I am not understanding y you are reaching 70% throttle while testing..? I was suggesting you to use prop savers while testing... there are chances to get small crashes that time.. we can avoid the prop and shaft damages at that time..
And popping of thevo ring never happened To me till now...

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 19, 2013, 10:24:12 PM

i already damaged my one set of props and the adapter during testing , so switched to the other set and the prop saver to attach them , when the thing happened ...

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: satyagupta on April 20, 2013, 08:46:42 AM

a bit off topic what are prop saves and prop adapters?? :headscratch:

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 20, 2013, 08:56:48 AM

The white bullet like thing to stop the prop from flying away - Prop Adapter
The other alternative ' screw fit ' item where the the prop is fixed by fixing it to the screws via a rubber like holder - PropSaver

I noticed u didnt have these in your site ...

Title: Re: Re: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: arun.sreelakam on April 20, 2013, 09:06:41 AM

Quote from: satyagupta on April 20, 2013, 08:46:42 AM
a bit off topic what are prop saves and prop adapters?? :headscratch:

Satya bro props savers are using usually in rc planes for saving the props while landing... the props will pop out of it by breaking the o ring..

Sent from my Canvas using tapatalk 2

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: satyagupta on April 20, 2013, 09:17:08 AM

Ahhh never used them so i dont know. Are they usefull in multirotors? i can get them in my store...

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 20, 2013, 09:21:40 AM

yes yes PLEASE !!! :D their main use is to stop the prop from flying away ..

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: satyagupta on April 20, 2013, 09:31:01 AM

Hmm commonly used size?

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 20, 2013, 09:48:53 AM

they are variations on it different sizes for different motors ... i personally need a 10 x 4.5 and prop adapter

total 8 sets ...

Title: Re: Prop Adaptor ( 3.17 mm ) And 10 X 4.5 Props wanted
Post by: parichya.gautam on April 20, 2013, 09:53:56 AM

u can check www.rcbazaar.com for the variations .. :)

RC India

RC Baazar => Wanted => Topic started by: parichya.gautam on April 19, 2013, 08:27:53 PM