Hai Guys...
I need help to find the best propeller for Tower Pro brushless Outrunner 2409-12T....
Please suggest prop other than GWS.
:help:
Suggested Propeller : 8*4 APC or 8*5 APC
where can i find APC props??
Only the specs matters not the manufacture
@ santhosh
But I cant use GWS prop with this motor because at full throttle the prop is making noise at the prop is being straightened... Other few props i found are heavy.. I need a light but strong prop...
pls help...
APC..
http://rotor.co.in/prod-list.asp?catid={A2047792-64C2-441B-BF54-92998B72ED37}
Any prop from hobbyking pls.... I need to buy a soon as possible....
Have been using APC "E" props on these without issues. Also used the 3 blade props from HK for the quadrotor.
The TowerPro combos came with a whitish prop from HK itself, that also works fine.
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6225
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6224
There are many choices on HK site, but always get some size variations so that you can experiment for best performance.
Try these,
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7155
i have got some 11x4.7 of these, they are stronger, stiffer and overall better quality than GWS.