Print Page - Smooth Ratchet plate for Futaba 6EX (For Heli Use)

Title: Smooth Ratchet plate for Futaba 6EX (For Heli Use)
Post by: maahinberi on April 01, 2014, 01:11:52 PM

Hi,
My Tx currently has the ratchet plate meant for airplanes. I need the smooth ratchet plate.
Can anyone tell me where I can get it from?
Thanks

Title: Re: Smooth Ratchet plate for Futaba 6EX (For Heli Use)
Post by: asupan on April 01, 2014, 02:16:02 PM

You may not need a smooth ratchet as you just need to loosen the screw that gives a pressure to ratchet for the throttle. Open the back cover of the transmitter to do the above. You can even put a fuel tube to make it smooth. Loosen the pressure till you feel smooth.
Cheer
Asupan

Title: Re: Smooth Ratchet plate for Futaba 6EX (For Heli Use)
Post by: maahinberi on April 01, 2014, 06:12:10 PM

Thanks! Any other ideas?? I read online somewhere that the ratchet can be flipped over, but there is an alignment tab on the ratchet plate which does not fit in that case.

RC India

RC Baazar => Wanted => Topic started by: maahinberi on April 01, 2014, 01:11:52 PM