anybody have these let me know.
If I use 10x4.5 or 10x 6 What could be the major diffrence in thurst and motor efficiency?
Any suggestion
chetan it is like asking, if i drive at 40 or 60 what will be the thrust difference, answer is IT DEPENDS ! depends on what (For driving, for instance the gear you are driving in, slope etc) for motor ? the following
(a) KV of you motor
(b) Batt voltage
(c) Number of cells of you batt (Boils down to previous)
(d) ESC you are using
(e) Amp Draw
(f) Speed at which you are flying
(g) and a dimensionless entity called v/nd
answer to your question, you could use 10x4.7 in place of 11x4.7, no issues, just that you system will function slightly sub optimally
you could also use
ecalc.ch to calculate your performance
thanks guys.
I was confuse as this DT750 motor data shows optimum performance with 11x4.7 props.
I will surely check tht Thanks everybody..
I hope with with 1 inch lesser my thurst may go down to 900g
well thanks for ecalc suggestion i completely missed that one. i will check ...
http://www.rcgroups.com/forums/showthread.php?t=1708731
I dint found any equi motor for dt750 in ecalc.
well custom setting give me go ahead with 11x4.7 props not with 10x4.5 ( wt =1500g)
all LHS not haiving those in stock ..
If anybody have n want to sell pls let me know