|
Title: wanted: futaba tx charger Post by: pankaj on February 23, 2010, 04:02:49 AM burnt my charger :'( looking for a futaba charger for my futaba t4yf(tx)
plz reply if any one having a spare... Title: Re: wanted: futaba tx charger Post by: rcforall on February 23, 2010, 06:28:29 AM http://cgi.ebay.in/GWS-Tx-Rx-Charger_W0QQitemZ110395502620QQcmdZViewItemQQptZLH_DefaultDomain_203?hash=item19b415b01c
Title: Re: wanted: futaba tx charger Post by: atul_pg on February 23, 2010, 09:03:25 AM I have a spare futaba charger..pm me..
Title: Re: wanted: futaba tx charger Post by: sandeepm on February 23, 2010, 01:23:05 PM burnt my charger :'( looking for a futaba charger for my futaba t4yf(tx) amy i know what do u mean by burnt...........what actually had happened..........did u open the charger..????plz reply if any one having a spare... Title: Re: wanted: futaba tx charger Post by: ujjwaana on February 23, 2010, 02:27:33 PM 1. Buy a 500ma 0-6-12v Adapter and remove the small PCB from the original Futaba Charger and put it in the new adapter. Connect the 0 tap in the center input on the PCB, 6v on the side which has Rx battery lead and 1v tap to the Tx side. you may ping me if you need more help on this as I did the same to replace my burnt 110v Futaba charger.
2. Much better still , if you are not adventurous like me(a DIY electronics guy), get one from Mr Sai. GWS is good. 3. http://indianhobbies.com/shop/index.php?main_page=product_info&cPath=68_28&products_id=318 . May be just little bit cheaper than GWS, if at all you are THAT price sensitive. I would have gone with GWS. 4. RCDhamaka also has original Sanwa charger, which are at lease Voltage/Pin compatible with Futaba. But you need the check for the polarity for the Tx pin. Title: Re: wanted: futaba tx charger Post by: merog on February 23, 2010, 04:01:18 PM I got two chargers. One from 9CHP and the other from Attack4. I can spare them for you, but there seems a problem. They came from the USA and they got "input: 120V" written on them. Ours is 230V right! So, probably it was the problem, when I connected them and charging my Tx, after some time, they stopped working. I dont know what happend. Now am charging them with my ProPeak Pro Digi III with the setup for NiCds.
Lemme know if you can fix this and still want it! Title: Re: wanted: futaba tx charger Post by: anwar on February 23, 2010, 04:31:55 PM http://www.rcindia.org/beginners-zone/repacing-burnt-charger-with-new-charger/
Title: Re: wanted: futaba tx charger Post by: pankaj on February 23, 2010, 06:12:19 PM http://www.rcindia.org/beginners-zone/repacing-burnt-charger-with-new-charger/ i read that already using "search" option. Title: Re: wanted: futaba tx charger Post by: anwar on February 23, 2010, 08:04:46 PM Great, that is the right thing to do !
That thread does discuss about some options on what you can do with the "dead" one, so it may be useful. |