RC India
Welcome Guest, please login or register.
 
Pages: 1 2 [All]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: August 03, 2010, 09:41:58 PM »
avdhruva
Plane Lover
Active Member
**

Reputation Power: 1 
avdhruva has no influence.
Offline Offline

City: jaipur
State: Rajasthan
RC Skills: Beginner
Posts: 5
Join Date: Aug, 2010




hey brother my team is going to make a quadrotor...
and i hav all comments here...
can u plz tell me the making cost of quadrotor..
i ahv to lift 1.5 kg....
and i want ceiling abt 100 meter..
plz help me... my id is avdhruva@gmail.com
Logged
 

Read
« Reply #1 on: August 05, 2010, 10:08:58 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



I hope you have spend some time on the forum on the quadrotor stuff. This seems to be a commonly asked question, with no ONE particular answer.  It is somewhat similar to saying I want to buy a bike, which hardly describes the task in any detail... there are so many choices and decisions to be made along the way.

Please go through the various quad related threads, and then ask specific questions.  There is only intermediate level experience in quads here... everyone seems to be in various stages of learning Smiley
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #2 on: August 06, 2010, 10:55:42 AM »
avdhruva
Plane Lover
Active Member
**

Reputation Power: 1 
avdhruva has no influence.
Offline Offline

City: jaipur
State: Rajasthan
RC Skills: Beginner
Posts: 5
Join Date: Aug, 2010



thanks anwar......
u right...n nw i hav read much here.....
so now i m going to make my quadrotor...with this specification
weight 1.5 kg...frame made from balsa wood...
18A-ESC , 2210N brushless motor GWS9050@3s
battery is 5000mah 15C
so plz suggest me abt the props and is necessary to add gyro and accelerometer in my quad...
bcoz i m nt making a autonomous quad...and my budget is abt 20000...
and from where i can buy these parts in india...
Logged
 

Read
« Reply #3 on: September 11, 2011, 09:58:03 PM »
Mayank
Plane Lover
Active Member
**

Reputation Power: 1 
Mayank has no influence.
Offline Offline

City: jalandhar
State: Punjab
RC Skills: Beginner
Posts: 1
Join Date: Aug, 2011



hi my team is going to it make a quadrotor can u tell me from where can i get 2210N brushless motors for in india
plz help......
Logged
 

Read
« Reply #4 on: September 11, 2011, 10:23:45 PM »
hemanthtguru
Plane Lover
Forum Veteran

****

Reputation Power: 6 
hemanthtguru has no influence.
Offline Offline

City: DAVANGERE
State: Karnataka
RC Skills: Advanced
Posts: 312
Join Date: Jan, 2011



Contact me I have all the spares required to build one...

Hemanth H I , 9902222294 hemanthtguru@gmail.com
Logged

Multirotor Freak
 

Read
« Reply #5 on: September 22, 2011, 05:22:55 PM »
Uday Praveen
Plane Lover
Active Member
**

Reputation Power: 1 
Uday Praveen has no influence.
Offline Offline

City: HYDERABAD
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 6
Join Date: Sep, 2011



avdhruva since you said your making quadrotor for first time try not using gyros instead use servos to tilt your motors slightly.one servo for normal rotating motors and one for counter rotating.as you said you are beginner gyros are not so easy to understand and they are way too costly.
Logged
 

Read
« Reply #6 on: October 28, 2011, 12:59:21 PM »
rcforall
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcforall barely matters.rcforall barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 1663
Join Date: Mar, 2009



We have a Quad with board that can be assembled and flown :
http://rcforall.co.in/advanced_search_result.php?keywords=quad&x=11&y=3

Sai
Logged

www.zuppa.io : vehicle telematics, ADAS, IoT , Drones
 

Read
« Reply #7 on: October 28, 2011, 02:45:42 PM »
Dharmik
Heli Lover
Forum Hero

*****

Reputation Power: 13 
Dharmik has no influence.
Offline Offline

City: Bharuch
State: Gujarat
RC Skills: Beginner
Posts: 1097
Join Date: Sep, 2011



try not using gyros instead use servos to tilt your motors slightly.
mate gyro gives stability.idea of servo to tilt the motor is good but without gyro it will make job difficult infact impossible to control quad.
Logged
 

Read
« Reply #8 on: December 13, 2011, 01:28:20 PM »
Madhu
Heli Lover
Active Member
**

Reputation Power: 1 
Madhu has no influence.
Offline Offline

City: Mysore
State: Karnataka
RC Skills: Beginner
Posts: 1
Join Date: Dec, 2011



i am planning to build a quad-rotor helicopter. Can u please suggest some sites or books that can help me do so.......
Logged
 

Read
« Reply #9 on: December 13, 2011, 02:54:40 PM »
xxkrishxx
Plane Lover
Forum Hero

*****

Reputation Power: 10 
xxkrishxx has no influence.
Offline Offline

City: Bangalore/Vellakovil
State: Tamil Nadu
RC Skills: Beginner
Posts: 834
Join Date: May, 2010

FLY HIGH...!!!



please use search option first and contact the persons who posted the related threads..
Welcome to rcindia..
Logged

BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |
 

Read
« Reply #10 on: January 11, 2012, 10:29:34 AM »
hemanth
Heli Lover
Active Member
**

Reputation Power: 1 
hemanth has no influence.
Offline Offline

City: hyderabad
State: Andhra Pradesh
RC Skills: Beginner
Posts: 2
Join Date: Aug, 2011



guys i am desperate too know the build model of a QUADROTOR. plz help me out wid the requirements its urgent
Logged
 

Read
« Reply #11 on: January 11, 2012, 10:36:36 AM »
hemanth
Heli Lover
Active Member
**

Reputation Power: 1 
hemanth has no influence.
Offline Offline

City: hyderabad
State: Andhra Pradesh
RC Skills: Beginner
Posts: 2
Join Date: Aug, 2011



[Moderator Edit] Similar post from unrelated topic merged with this one. Please take care to see where you're posting and don't post the same thing in multiple threads.
« Last Edit: January 11, 2012, 10:52:45 AM by iamahuman » Logged
 

Read
« Reply #12 on: March 24, 2012, 10:34:32 PM »
rahulsahu
Plane Lover
Active Member

**

Reputation Power: 2 
rahulsahu has no influence.
Offline Offline

City: jaipur
State: Rajasthan
RC Skills: Beginner
Posts: 96
Join Date: Feb, 2012



hey gyes///...i want to make quadrotor ...my budegt is 16000...give some link to buy product of it n tutorial..
Logged
 

Read
« Reply #13 on: March 25, 2012, 11:16:46 AM »
Swapnil
Plane Lover
Forum Hero

*****

Reputation Power: 20 
Swapnil barely matters.Swapnil barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 1755
Join Date: May, 2010

Retreat, Hell!



Here you go:

http://rcforall.co.in/index1.php?cPath=34_82&osCsid=269653ca0ba8b70c364ce814d6689ef5
Logged
 

Read
« Reply #14 on: March 07, 2013, 01:03:18 AM »
ikishan
Plane Lover
Active Member
**

Reputation Power: 1 
ikishan has no influence.
Offline Offline

City: tirupathi
State: Andhra Pradesh
RC Skills: Beginner
Posts: 13
Join Date: Mar, 2013



hi anwar.
 Smiley
i need to know is their any appropriate dimension ratios for a quadrotor. "diagonal to sides" for a lift up i am making a quad X


it is 82 cm from prop(center) to prop(center) diagonally  and 58.2 sideways ..... my quad wiegh about 3 kg  Roll Eyes


so is this okey with the physics. Huh?
Logged
 

Read
« Reply #15 on: June 23, 2013, 07:20:06 PM »
subbu46
Heli Lover
Active Member

**

Reputation Power: 1 
subbu46 has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 39
Join Date: Jun, 2013

never loose hope.. there is plenty to learn ;)



hi, do u have a price list for the parts tp make a quadcopter ? plz reply thanx.
Logged
 

Read
« Reply #16 on: August 18, 2013, 10:34:42 AM »
ANU34RAG
Plane Lover
Active Member
**

Reputation Power: 1 
ANU34RAG has no influence.
Offline Offline

City: RaeBareli
State: Uttar Pradesh
RC Skills: Beginner
Posts: 1
Join Date: Aug, 2013



I want to know what should be the minimum budget to make a quadcopter just with the motive that it should stay in air at height near 5-10 metres for 2-3 minutes?
Also describe the body material
Can thermocol be used for making the body parts?
Logged
 

Read
« Reply #17 on: August 18, 2013, 12:36:15 PM »
aniket210696
Plane Lover
Forum Hero

*****

Reputation Power: 10 
aniket210696 has no influence.
Offline Offline

City: Salem
State: Daman and Diu
RC Skills: Beginner
Posts: 1184
Join Date: Feb, 2013



hi welcome to RcIndia!

why dont you start here? >> http://www.rcindia.org/rc-india-forum/the-rc-india-gems/

the questions you ask have been answered dozens of times... just use the search bar at the top right corner of the screen to search... Smiley

thanks
aniket
Logged

oui
 

Read
« Reply #18 on: August 28, 2013, 10:54:37 PM »
SaurIMX
Heli Lover
Active Member
**

Reputation Power: 1 
SaurIMX has no influence.
Offline Offline

City: nagpur
State: Maharashtra
RC Skills: Beginner
Posts: 12
Join Date: Aug, 2013



hello guy, i am new in here.....
i want to built a quadcopter (i don't have any past experience). my whole quadcopter weight should be around 1.5kgs.
what esc and motors do you guys recommend?
Logged
 

Read
« Reply #19 on: August 28, 2013, 11:17:35 PM »
atulrajguru9
Plane Lover
Forum Veteran
****

Reputation Power: 5 
atulrajguru9 has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 337
Join Date: Nov, 2010



Please use search feature. This have been asked and answered by many times
Logged
 

Read
« Reply #20 on: August 28, 2013, 11:40:03 PM »
EricOliver
Plane Lover
Senior Member
***

Reputation Power: 3 
EricOliver has no influence.
Offline Offline

City: Ranchi
State: Jharkhand
RC Skills: Intermediate
Posts: 220
Join Date: Aug, 2013




I think you've all the parts ...you just need motors and esc.....then also im give all the parts required for quad

The motors and esc's listed are the best in terms of price so if you want good performance without being costly these are for you.....

And for quad you need motors having low KV prefer from 800-1200kv motors as they will provide more thrust....


.im also posting links to hobbyking so you can easily buy....Mostly i will focus on best but no heavy on cost so here it is....

Frame-I would say you should make your own frame as its easy....but if you want readymade here are some

Hobbyking quad frame 680mm(9.95$)-http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=20947&aff=1139072

Motors-Turnigy 2836/8  1100kv  (12.50$)-http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=18969&aff=1139072

Esc-hobbyking 30a esc 3a ubec(9.99$)-http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=15205&aff=1139072

Lipo batteries-turnigy 3s 2200mah  20-30c. (7.89$) -http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8932&aff=1139072

Flight controller- as you are beginner i would recommend kk multicopter v2.0 board as it is very easy to use it has preset for quad select that and you are ready to fly....here's the link

Kk multicopter v2.0  (29.99$)-http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24723&aff=1139072

Radio set (Tx & Rx)- i would recommend to buy this from indian shops as it will increase the shipping weight a lot....so heres the link for radio se 6ch with Tx and Rx...

Radio set (Tx & Rx) (Rs-3280)-http://thehobbyshop.in/index.php?main_page=product_info&cPath=74_9&products_id=21

Propellers 10x4.5(2lh, 2rh). (2.65$)-http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25824&aff=1139072

Power distribution board(3.89$)-http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=23140&aff=1139072


Total weight will be....1122gms

Logged
 

Read
« Reply #21 on: August 29, 2013, 08:48:51 AM »
EricOliver
Plane Lover
Senior Member
***

Reputation Power: 3 
EricOliver has no influence.
Offline Offline

City: Ranchi
State: Jharkhand
RC Skills: Intermediate
Posts: 220
Join Date: Aug, 2013



Your budget is 20000, then also your using low end motors and esc's.....make use of that money.....at that much money you could get high performance quad.....
Logged
 

Read
« Reply #22 on: August 29, 2013, 09:31:07 PM »
vikirobot
Plane Lover
Active Member
**

Reputation Power: 1 
vikirobot has no influence.
Offline Offline

City: chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2
Join Date: Aug, 2013



I am trying to make a quadcopter Bang Head(i have some programming knowledge). I am seeing that many quads are made from brushless motors. I am trying to make one using a brushed 5oooorpm motor. I am following this link:
http://www.rcgroups.com/forums/showthread.php?t=1710948  
 (above link shows a quad made out of 18$........only thing i dont understand is the board he use? is it arduino compitable? programable? dose it have IMU or 6 DOF sensors?? )


That guy uses a board of unknown specifications (if you know just inform me).

so I am going to use an Arduino Uno microcontroller to make my own flight controller with 6 dof IMU.
Here is my parts list:
  
 1. arduino uno(micro controller)
 2. four motors(just look at rcgroup link.since i cannot post more than 2).
 3. propellers
 4.a 9v 1200mAhr lipo
 5. trans receivers

I don't have a radio controller. Is it possible to build one
using two of these?
http://www.fasttech.com/products/1005/10002877/1215201-nrf24l01-enhanced-24ghz-wireless-transceiver-modul

Using arduino on both ends (quad and DIY joystick).
For ESC what should i do? can i use uln2003 or mje13005 transistor(connect motor across EC and pwm at B)?is there any DIY ESC available to make

for motor which one is good for flying  from this list

http://www.fasttech.com/products/1014/10003892/1278101-45v-dc-micro-motor-ff-m10va-08210

http://www.fasttech.com/products/1014/10003892/1278002-15v-dc-micro-motor-ff-k20wd-08127

http://www.fasttech.com/products/1014/10003126/1231801-3-8v-dc-high-speed-strong-magnetic-micro-motor-f

http://www.fasttech.com/products/1014/10003892/1278006-3v-dc-micro-motor-ff-k30wd-8z107

I am trying to finish it within 30 or 35$.

give me some link about design and electronics
First of all is it possible using the above parts list? Huh?


Logged
 

Read
« Reply #23 on: August 30, 2013, 01:47:48 AM »
v2 eagle
AK
Plane Lover
Forum Hero

*****

Reputation Power: 12 
v2 eagle has no influence.
Offline Offline

City: chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 1178
Join Date: Jun, 2013



Hi Viki,
Welcome to the forum, Thumbs Up

1.Brushless motors are preferred for aeromodelling because of their ability to produce lot of thrust and good efficiency throught their lifespan.

2.Me either have no idea about quads,

3.anyways it isnt recommended to go for complete scratch  building of everything, atleast the Tx and RX part. 

4.the board used is a controller board that takes care of controlling all the motors to spin at constant rpm to produce equal thrust to balance the multicopter.

5.Maybe you can try the below links
http://www.quadkopters.com/product/998-v2-2-4g-4ch-mini-quadcopter-with-vga-camera/
http://www.quadkopters.com/product/qk525-arf-rtf-quadcopter-kit/

6.Escs arent hard to scratchbuild but building them is a tedious job, and might be heavier and bigger than readymade ones. might not be power efficient always.

7.the given link has a readymade kit which might come under your budget.

Happy flying.
AK.
Logged

 

Read
« Reply #24 on: August 30, 2013, 07:01:21 AM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



There are some major things you have not considered.

First of all, the RCG person just used a commercial controller, which has the flight controller, 3 axis gyro, 4 ESCs and a receiver in a single unit, so all he needs are motors, props and a transmitter.  Basically, it is the board that powers these ultra cheap (and really small) quads. Nothing outstanding about what he has done, and very little DIY it seems.

This is the commercial quad from which he took the controller : http://www.banggood.com/buy/WL-929-quad.html

This is the controller all-in-one unit : http://www.banggood.com/Wholesale-WLtoys-V939-Beetle-4-Axis-Quadcopter-Spare-Parts-PCB-Receiving-Board-V939-05-p-49468.html

Your parts list is missing some key items, like the radio TX RX, 3 axis gyro/6DOF IMU, ESCs etc. Not to discourage you from trying, but hand crafting even some of these (tx/rx or ESCs) can itself become quite an effort.

Overall, you need to spend a whole lot more time on this forum and elsewhere, then decide how much DIY you want to do. Currently, you seem to have bitten more than what you can chew.

There are some errors in "v2 eagle"s responses to your questions also. Specifically, the job of controller is NOT to maintain constant RPM, but offset unintended changes in orientation of the craft by constantly adjusting the speeds of different motors to keep the craft level, based on a feedback loop from the 3 axis gyros (or you can think about the same in terms of an "inertial measurement unit"/IMU with 6 "degrees of freedom"/DOF).
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #25 on: August 30, 2013, 08:28:46 AM »
v2 eagle
AK
Plane Lover
Forum Hero

*****

Reputation Power: 12 
v2 eagle has no influence.
Offline Offline

City: chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 1178
Join Date: Jun, 2013



Sorry Anwar,
 I tried my best to explain Viki about how the controller board works.  Bang Head

Thanks
AK.
Logged

 

Read
« Reply #26 on: August 30, 2013, 09:03:14 PM »
vikirobot
Plane Lover
Active Member
**

Reputation Power: 1 
vikirobot has no influence.
Offline Offline

City: chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2
Join Date: Aug, 2013



thanks for the reply

what about the links to the motor i posted?

if i buy above said flight controller or any other controller should i have to program it or it comes pre programmed?
« Last Edit: August 30, 2013, 09:13:57 PM by vikirobot » Logged
 

Read
« Reply #27 on: August 31, 2013, 02:37:16 PM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2154
Join Date: Jul, 2013



you can get this quadcopter set http://www.quadkopters.com/product/diy-v939-quadcopter-kit/
this one comes with a flight controller board also so enjoy your quad you would just require a tx,rx set
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #28 on: August 31, 2013, 05:38:21 PM »
Dk
Plane Lover
Senior Member
***

Reputation Power: 4 
Dk has no influence.
Offline Offline

City: jaipur
State: Rajasthan
RC Skills: Intermediate
Posts: 241
Join Date: Jan, 2013



hello bro im also from jaipur ....and i can help you.. Smiley
you can contact me at 9929319697
thnx Salute
Logged
 

Read
« Reply #29 on: April 07, 2014, 09:45:55 PM »
Avadhut10001
Plane Lover
Senior Member

***

Reputation Power: 2 
Avadhut10001 has no influence.
Offline Offline

City: Karad /Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 160
Join Date: Mar, 2011



How to choose Motor and Propeller for Quadcopter.. high thrust,high carry weight, 20-30amp ESC , low cost  Indian Rupees?


pls help  Head Scratching
Logged

Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service
 

Read
« Reply #30 on: April 07, 2014, 10:19:23 PM »
Shyam Hembram
Plane Lover
Forum Veteran
****

Reputation Power: 7 
Shyam Hembram has no influence.
Offline Offline

City: bhubaneswar
State: Orissa
RC Skills: Beginner
Posts: 494
Join Date: Dec, 2012



A low kv motor is good for a quad, like about 1000kv or below, prop size in the range of 9"-11"inch which depends upon your battery setup and costs  above 10k for a good setup if you already have a radio or else you have to spend more for a radio.
Take some time reading threads and googling will help you.
Logged

Hiller450 chopper,Sky surfer v2,Wilga2000,450quad(building)
 

Read
« Reply #31 on: April 07, 2014, 11:32:37 PM »
Rahulvyas
Crazy Quad-er
Plane Lover
Forum Hero

*****

Reputation Power: 13 
Rahulvyas has no influence.
Offline Offline

City: New Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1062
Join Date: Aug, 2012

"If it's man-made and it flies, it will crash."



decide how much weight u want to carry, what u want it to do, your exact budget,etc
Logged

-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student
 

Read
« Reply #32 on: April 08, 2014, 01:06:59 AM »
maahinberi
Plane Lover
Forum Hero

*****

Reputation Power: 7 
maahinberi has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 611
Join Date: Feb, 2011

In Thrust, I Trust



Hi Avadhut, welcome to the Forum  Smiley
Refer to the following link:
http://www.rcindia.org/multirotors/choosing-motors-and-the-propellers-for-quadcopter/
Logged

Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.
 

Read
« Reply #33 on: April 10, 2014, 10:34:39 PM »
Avadhut10001
Plane Lover
Senior Member

***

Reputation Power: 2 
Avadhut10001 has no influence.
Offline Offline

City: Karad /Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 160
Join Date: Mar, 2011



yes. i want to carry 1-2kg weight ... camera and other dropping

pls help !
Logged

Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service
 

Read
« Reply #34 on: April 10, 2014, 11:13:01 PM »
maahinberi
Plane Lover
Forum Hero

*****

Reputation Power: 7 
maahinberi has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 611
Join Date: Feb, 2011

In Thrust, I Trust



You can refer to this thread for getting an idea about what all you would need:
http://www.rcindia.org/multirotors/choosing-motors-and-the-propellers-for-quadcopter/

Read it completely. After getting a brief idea, then you can ask any specific doubts you have over here.
Logged

Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.
 

Read
« Reply #35 on: April 11, 2014, 08:46:17 PM »
Avadhut10001
Plane Lover
Senior Member

***

Reputation Power: 2 
Avadhut10001 has no influence.
Offline Offline

City: Karad /Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 160
Join Date: Mar, 2011



Thanks !  Hats Off Salute Thumbs Up
Logged

Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service
 

Read
« Reply #36 on: May 10, 2014, 02:08:49 PM »
surajshah9
Plane Lover
Active Member
**

Reputation Power: 1 
surajshah9 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 4
Join Date: Oct, 2011



Hi there!

I am also doing some research as I want to build/purchase my own quad.  You can check this link out:-

http://oddcopter.com/2012/12/12/easy-diy-quadcopter-build-part-1-the-parts-list/
Logged
 

Read
« Reply #37 on: May 10, 2014, 08:03:32 PM »
maahinberi
Plane Lover
Forum Hero

*****

Reputation Power: 7 
maahinberi has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 611
Join Date: Feb, 2011

In Thrust, I Trust



Parts are good. You can also use the following ESCs:
http://hobbyking.com/hobbyking/store/__9483__Mystery_30A_BEC_Brushless_Speed_Controller_Blue_Series_.html
http://hobbyking.com/hobbyking/store/__13429__HobbyKing_30A_BlueSeries_Brushless_Speed_Controller.html

You can also save some money if you are willing to scratch build the frame. It isn't very hard. All you need is Plywood and 1/2" square wooden booms.

The radio mentioned in that parts list is a very cheap option. I would suggest you to put in a little more money and buy atleast a 6 channel programmable radio. It will save you a lot of money later, as you won't have to buy another radio when you need a programmable one.

A word of advice, preferably do not order a radio from an international site as it gets stuck at customs. It would be better to order a radio from a local hobby shop.
Take a look at this:
http://www.rcbazaar.com/products/2011-avionic-rcb6i-24ghz-6ch-transmitter-with-receiver.aspx
Logged

Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.
 

Read
« Reply #38 on: May 15, 2014, 12:16:52 PM »
surajshah9
Plane Lover
Active Member
**

Reputation Power: 1 
surajshah9 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 4
Join Date: Oct, 2011


Re:

Thanks...will look into it.
Logged
 

Read
« Reply #39 on: February 19, 2015, 07:25:02 PM »
irshtin
Plane Lover
Active Member
**

Reputation Power: 1 
irshtin has no influence.
Offline Offline

City: Coimbatore
State: Tamil Nadu
RC Skills: Beginner
Posts: 8
Join Date: Feb, 2015



Hello to all .. I'm New to qquadcopters... I've got my tx from flysky .. Pls tell me from where should I buy the frame and other components since I request u all to give me suggestions about hobbyking .. and what will be the rates when compared with the ones I buy in India .. Pls help ...
Logged
 

Read
« Reply #40 on: February 19, 2015, 08:31:40 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5154
Join Date: Jan, 2012



@irshtin,
Welcome to RC India.
Please do a little searching on this forum.
Adequate info is available.
You can start by looking at www.quadkopters.com
Then search for Mega list of RC outlets (on the home page of RCI)
There are now many Indian online stores with good reputation.
Best wishes.
Logged
 

Read
« Reply #41 on: February 19, 2015, 08:36:16 PM »
sahilkit
LOVE MICRO RC
Plane Lover
Forum Hero

*****

Reputation Power: 18 
sahilkit has no influence.
Offline Offline

City: Hyderabad
State: Telangana
RC Skills: Beginner
Posts: 1533
Join Date: Mar, 2009

MICROSTAR 2000



i think sticking with quadkopters is a good idea for newbie.
Logged

Today might be a great and wonderful day. It depends on you.
 

Read
« Reply #42 on: February 19, 2015, 08:45:24 PM »
irshtin
Plane Lover
Active Member
**

Reputation Power: 1 
irshtin has no influence.
Offline Offline

City: Coimbatore
State: Tamil Nadu
RC Skills: Beginner
Posts: 8
Join Date: Feb, 2015



Thanks for your suggestions .. when I compared the rates from hobbyking,many items r heavily prized here when compared to hobbyking ..so I've made a decision to buy from hobbyking ... help me with it pls ...
Logged
 

Read
« Reply #43 on: February 19, 2015, 09:36:06 PM »
Rcjabalpur
Plane Lover
Forum Hero

*****

Reputation Power: 6 
Rcjabalpur has no influence.
Offline Offline

City: jabalpur
State: Madhya Pradesh
RC Skills: Beginner
Posts: 500
Join Date: May, 2014



The items might be a little expensive here but I suggest you buy from India . If you take the shipping charges , time and customs in consideration you wont be buying from Hobbyking . If you buy from your local hobby shop you can return the damaged or defective items .
Logged

Hobbico next star | sky surfer V2 | .46 High wing trainer | O.S .46 Ax | O.S .46 La | O.S 55 AX | super tigre .10 motor | Spektrum DX5e | FUTABA 10J | Hitec X4 Eighty | Phoenix Scanner | Multiplex Twinstar ii

Acquiring soon |  no plans as of yet  |

The ultimate responsibility of the pilot is to fulfill the dreams of the countless millions of earthbound ancestors who could only stare skyward and wish.
 

Read
« Reply #44 on: February 19, 2015, 09:58:10 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5154
Join Date: Jan, 2012



Bought 10meter 6mm rubber tube from Hobbyking for USD 3.69, say Rs200.
Ended up paying Rs 850, due to shipping cost...

One lives and learns.

As an experiment, compare the landed cost of say a 'Sunbird' kit for Hobbyking, against the price from RCB/RCD Bangalore.
Logged
 

Read
« Reply #45 on: February 20, 2015, 11:37:48 AM »
miginstruments
Plane Lover
Forum Hero
*****

Reputation Power: 8 
miginstruments has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 705
Join Date: Feb, 2014



you can also check out rcmumbai.com
Logged
 

Read
« Reply #46 on: June 09, 2015, 01:14:43 AM »
SARANSH Lakra
Plane Lover
Active Member
**

Reputation Power: 0 
SARANSH Lakra has no influence.
Offline Offline

City: New Delhi
State: Delhi
RC Skills: Advanced
Posts: 1
Join Date: Jun, 2015



use aluminium or plastic for frame.
Logged
 

Pages: 1 2 [All]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
quadrotor « 1 2 3  All »
Self-designed, DIY and College Projects
RVRENJITH 66 42790 Last post September 04, 2012, 07:54:30 PM
by swapnil5775
quadrotor
Self-designed, DIY and College Projects
Naveenprabu 1 3434 Last post September 10, 2010, 10:33:17 AM
by vulture
QUADROTOR
Self-designed, DIY and College Projects
jeevan reddy 5 4276 Last post December 20, 2011, 07:43:02 PM
by jeevan reddy
My first quadrotor!
Multirotors
Ganeshram 6 5826 Last post March 17, 2013, 06:34:55 PM
by rcpilotacro
Dji 450 quadrotor
For Sale
ram singh 3 1527 Last post June 01, 2020, 07:39:34 PM
by ram singh