The first thing to do is to divide the parts of the kit according to the various sections of the aircraft: tail, wings, central section, moving parts, fuselage and steering supports. And this is where the first problem arises: the laser-cut sheets are not divided into sections, but may contain parts for the wing, servo supports or spars with ribs of moving parts, as is the case with some sheets. This would not be a problem if all the parts were labelled with the name of the part they are going to build, but this is not the case. Others are printed with sequential numbers to be followed when assembling the wing or elevator, etc. Unfortunately, this kit does not even contain a drawing of the model with the various parts to be assembled, and I pointed this problem out to the manufacturer, Iad, but I received no response other than the advice to look at the photos on the Facebook group (https://www.facebook.com/groups/1350973201704574/). There are indeed many photos, but they are not enough to overcome some minor obstacles that may be encountered when assembling certain parts. A diagram is definitely essential for this kit, or at least it would be advisable to mark all the cut pieces with specific codes.
However, with a little care and by browsing through the hundreds of photos available, you can overcome any difficulties. Those who have already built similar kits will have an advantage, while novices will have to work harder. For assembling the various parts of the kit, I generally used Pattex vinyl glue and aliphatic glue, while for structural gluing I used two-component epoxy glue.
The fuselage of the kit is a single piece moulded in epoxy resin and fibreglass, and feels a little light to the touch. Before assembling the model, I reinforced the attachment points of the landing gear and wing with 160 g/m² carbon fabric to give it greater strength. The internal stringers and the front landing gear tower fit perfectly, while the hole in the fuselage for the landing gear to exit must be cut by the model maker; a plywood template is provided for this purpose, as for the wing landing gear bays. The front of the fuselage has a removable cone that allows access to a solid plywood base locked in place with the last fuselage frame, which will be used to house the batteries. All very functional. The central part of the wing is locked into the fuselage by means of a front joint on a frame and two nylon screws that lock onto a support glued into the fuselage.

@Rooster,

That rowboat and boatman together are really works of art.
Though ole gramps doesn't smile, he seems at peace rowing about aimlessly!

Regards
Iyer

POsting another video of Row boat sailed this weekend.

Goblin thunder 700
It's one of the best looking rc helis I have ever seen.
Comes with stock blades to match the paint scheme.
Flown 5-6 times only in very good condition.
Asking 50k for airframe only with blades n battery trays

Follow this link to join Flyingmachines WhatsApp community: https://chat.whatsapp.com/HcmkT1iTVuv2pMOG83wY7v

State wise Groups
Announcements on every event

Get connected to the community.

The assembly of this kit is aimed at model makers who have a minimum of experience in building pre-cut wooden kits, but I must say that, being only on my third experience, I realised that this kit is particularly accurate in the precision of the joints and the cutting of the pieces. To assemble everything, you need a few tools such as a sander, a mini drill, etc., as well as spirit levels and 90° squares for checking. In my workshop, I have a wide range of Proxxon accessories that I use for my work, and I must say that they have never caused me any problems. The great thing about these tools is that they come with a huge range of accessories of all kinds, perfect for building wooden/balsa wood kits. I have tried alternatives, but then I went back to buying Proxxon. This may sound like an advertisement, but since I now have a lot of tools at home, I can only emphasise their quality. Then again, everyone has their own preferences...

Oxy 5
Will sell the airframe or with electronics.
Has been repaired after a hard landing.
Currently installed is a scorpion motor n ESC. Kst servos n vbar mini.

Trex 550l and 550e

550l is complete with KDE 12s motor
550e in parts with align 600mx motor with few more parts you complete this one as well.
Everything in good condition.

Asking 70k or best offer

Trex 500x
Stock align motor
Stock align ESC
Included is one servo
Extra parts like linkages,boom,gears,rotor clip,and many more look at the pics
Everything in perfect condition
Never crashed
Needs cyclic servos and fbl unit to make it RTF (can include them with extra costs)

Asking 50k or best offer